| Home |
| Search |
| Today's Posts |
|
#12
|
|||
|
|||
|
"myo aung" wrote in message ... does anyone has soldering iron that i can borrow I believe in being as autonomous as possible on my boat or in my shop. Seldom find a need to borrow anything.. Additionally I attempt to be as independent of shore power as possible when it comes to onboard repairs. That said, I have a 12 volt soldering iron, from Radio Shack. I'm not sure of the wattage but it must be around 40 watts and is somewhat dependent on the battery voltage. I all but electronics, I much prefer it to my 120 vac soldering iron. Really heats fast and does a great job on the heavier electrical connectors. My experience and opinion, FWIW. Steve s/v Good Intentions |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| If you have to solder | Cruising | |||
| Replacing old cast iron fuel tank...what's the best tank? | Cruising | |||
| Butane Soldering Iron | Cruising | |||
| Cost of an Ancient Warship | Boat Building | |||