Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 25th 04, 08:45 PM
 
Posts: n/a
Default Perkins Prima 500

Am checking out a home-built (superficially, to a high standard)
Roberts 370 (cutter version). I have a question about the engine the
builder/owner installed: the Perkins "Prima" 500. It has just over
1,000 hours on it and has seen one trip to and from the Bahamas. The
boat in question is currently on the hard in eastern Ontario (i.e.
fresh water). The engine was installed in 1997 when the boat was
built. I have not established if it was new or used in 1997.

Any thoughts on the quality, durability and parts cost and
availability of this Perkins model? I understand it's a four cylinder,
50 HP model, which sounds pretty beefy for a 17,000 lb. 37 footer, but
that's no objection.

I am aware of the great rep the Perkins 4-108 had for so many years,
and this was the sucessor model, or so I believe. I am finding it
difficult to garner comments one way or another online.

Any comments, criticisms and real-life experience would be
appreciated. I find a lot of English engineering, particularly
electrical, to be dodgy, and want to know if in the greater scheme of
this potential purchase, the engine is a plus or a minus.

Thanks,
R.

  #2   Report Post  
Old January 26th 04, 05:15 AM
Larry W4CSC
 
Posts: n/a
Default Perkins Prima 500

We just replaced a 4-108 with 8000+ hours on it with a 4-108 I got
from one of the newsgroup posters on rec.boats.cruising. My captain
paid him $1200 for the engine/transmission/controls/guages/everthing.

We stole it....(c; Runs great! Even the worn out old one ran great
once you got past the oil pouring out of the worn-out rear seal.

Perkins makes great engines. Of course, yours will depend on how it's
been MAINTAINED.....


Larry W4CSC

Is it just me or did the US and UK just capture 1/3
of the world's sweetest oil supply? What idiot wants to
GIVE IT BACK?!!
  #3   Report Post  
Old January 26th 04, 05:15 AM
Larry W4CSC
 
Posts: n/a
Default Perkins Prima 500

We just replaced a 4-108 with 8000+ hours on it with a 4-108 I got
from one of the newsgroup posters on rec.boats.cruising. My captain
paid him $1200 for the engine/transmission/controls/guages/everthing.

We stole it....(c; Runs great! Even the worn out old one ran great
once you got past the oil pouring out of the worn-out rear seal.

Perkins makes great engines. Of course, yours will depend on how it's
been MAINTAINED.....


Larry W4CSC

Is it just me or did the US and UK just capture 1/3
of the world's sweetest oil supply? What idiot wants to
GIVE IT BACK?!!


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Perkins Prima 500 [email protected] Boat Building 1 January 26th 04 05:15 AM
Perkins still made? [email protected] Cruising 10 September 28th 03 06:17 PM
Hurth transmission problems on Perkins M-30 diesels OMOO Boat Building 3 September 15th 03 01:01 PM
Hurth transmission problems on Perkins M-30 diesels OMOO Cruising 3 September 15th 03 01:01 PM
Overheating Perkins revisited..... Gould 0738 General 26 September 5th 03 01:28 PM


All times are GMT +1. The time now is 05:26 AM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2004-2020 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017