Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Are you saying the new Yamaha 2.5 hp 4 stroke is a more reliable engine
than the Honda 2 hp 4 stroke air cooled engine? In this area they cost close to the same and I was wondering which to buy. Schoonertrash wrote in message ... I had one of those imitation Mercury's in 3.3HP. The local Mercury dealer wouldn't touch the thing. This must be the four stroke version. The only brand to buy is Yamaha. Honda doesn't even run a close second. Go across the S.Pacific and you see Honda's junked. They break more than Yamaha's and you have to send them back to the factory for repair. Try that from Niue. The worst is the Sears Gamefisher series. MST |
#12
![]() |
|||
|
|||
![]()
I'd vote for Yamaha from experience. Also from seeing the number of Honda
outboards piled up across the Pacific in many places. Most were said to be under warranty and most were fixable but they all had to be sent back to the factory. Yamaha allowed the repairs, if needed, to be done at the local dealers. The cost of sending them in (you pay one way they pay return) from out there was prohibitive. Easier to spend a few dollars more to begin with and buy something that lasted better and could be warranty repaired locally. Also Honda did not have the equivalent of the T-Series or work engines as does Yamaha. They advertise a wide range of speed for all needs. What that means to the guy in the commercial fishing small boat or with a sailboat is a huge waste of power band at the upper speeds. Honda tried to be everything to everybody in one engine. Yamaha just provided something that worked. As for two strokes .. .the biggest market in the world is slowly but surely banning them. Yamaha saw the writing on the wall. MST |
#13
![]() |
|||
|
|||
![]()
I'd vote for Yamaha from experience. Also from seeing the number of Honda
outboards piled up across the Pacific in many places. Most were said to be under warranty and most were fixable but they all had to be sent back to the factory. Yamaha allowed the repairs, if needed, to be done at the local dealers. The cost of sending them in (you pay one way they pay return) from out there was prohibitive. Easier to spend a few dollars more to begin with and buy something that lasted better and could be warranty repaired locally. Also Honda did not have the equivalent of the T-Series or work engines as does Yamaha. They advertise a wide range of speed for all needs. What that means to the guy in the commercial fishing small boat or with a sailboat is a huge waste of power band at the upper speeds. Honda tried to be everything to everybody in one engine. Yamaha just provided something that worked. As for two strokes .. .the biggest market in the world is slowly but surely banning them. Yamaha saw the writing on the wall. MST |
#14
![]() |
|||
|
|||
![]()
TheYamaha 2.5hp has better features also, including a true neutral gear and
water cooling. Schoonertrash wrote in message ... I'd vote for Yamaha from experience. Also from seeing the number of Honda outboards piled up across the Pacific in many places. Most were said to be under warranty and most were fixable but they all had to be sent back to the factory. Yamaha allowed the repairs, if needed, to be done at the local dealers. The cost of sending them in (you pay one way they pay return) from out there was prohibitive. Easier to spend a few dollars more to begin with and buy something that lasted better and could be warranty repaired locally. Also Honda did not have the equivalent of the T-Series or work engines as does Yamaha. They advertise a wide range of speed for all needs. What that means to the guy in the commercial fishing small boat or with a sailboat is a huge waste of power band at the upper speeds. Honda tried to be everything to everybody in one engine. Yamaha just provided something that worked. As for two strokes .. .the biggest market in the world is slowly but surely banning them. Yamaha saw the writing on the wall. MST |
#15
![]() |
|||
|
|||
![]()
TheYamaha 2.5hp has better features also, including a true neutral gear and
water cooling. Schoonertrash wrote in message ... I'd vote for Yamaha from experience. Also from seeing the number of Honda outboards piled up across the Pacific in many places. Most were said to be under warranty and most were fixable but they all had to be sent back to the factory. Yamaha allowed the repairs, if needed, to be done at the local dealers. The cost of sending them in (you pay one way they pay return) from out there was prohibitive. Easier to spend a few dollars more to begin with and buy something that lasted better and could be warranty repaired locally. Also Honda did not have the equivalent of the T-Series or work engines as does Yamaha. They advertise a wide range of speed for all needs. What that means to the guy in the commercial fishing small boat or with a sailboat is a huge waste of power band at the upper speeds. Honda tried to be everything to everybody in one engine. Yamaha just provided something that worked. As for two strokes .. .the biggest market in the world is slowly but surely banning them. Yamaha saw the writing on the wall. MST |
#16
![]() |
|||
|
|||
![]()
Hi,
I have Hobie Cat 21 sailboat, and is looking for small motor to propel me out/to launch pad. I bought used Sears Gamefisher (terrible mistake), but has to sell it off. It has spark plug and wire outside and completely open, so as soon as it gets wet, it stops completely and can't be started until it dries. So, all I could do is to start it at the very beginning and run it up to the first wave from big power boat :-(. My specific is that I have to place it on "extension" pole, so it is very easy to get it splashed and wet. Now I am looking on Yamaha 2.5 or Honda 2.0 and I like their design, where everything is covered and hidden inside cover, it is 4 strokes, quieter and cleaner. In case of Yamaha, I think that even if small wave come over, it should stay dry inside and running. I am not so sure that is also true for Honda, since it is more open and air-cooled, but it is lighter. Does anybody can give me some advice, or may be has some experience? It sounds funny, but I am looking for waterproof outboard engine ![]() Thanks, Peter. "Don White" wrote in message ... TheYamaha 2.5hp has better features also, including a true neutral gear and water cooling. Schoonertrash wrote in message ... I'd vote for Yamaha from experience. Also from seeing the number of Honda outboards piled up across the Pacific in many places. Most were said to be under warranty and most were fixable but they all had to be sent back to the factory. Yamaha allowed the repairs, if needed, to be done at the local dealers. The cost of sending them in (you pay one way they pay return) from out there was prohibitive. Easier to spend a few dollars more to begin with and buy something that lasted better and could be warranty repaired locally. Also Honda did not have the equivalent of the T-Series or work engines as does Yamaha. They advertise a wide range of speed for all needs. What that means to the guy in the commercial fishing small boat or with a sailboat is a huge waste of power band at the upper speeds. Honda tried to be everything to everybody in one engine. Yamaha just provided something that worked. As for two strokes .. .the biggest market in the world is slowly but surely banning them. Yamaha saw the writing on the wall. MST |
#17
![]() |
|||
|
|||
![]()
Hi,
I have Hobie Cat 21 sailboat, and is looking for small motor to propel me out/to launch pad. I bought used Sears Gamefisher (terrible mistake), but has to sell it off. It has spark plug and wire outside and completely open, so as soon as it gets wet, it stops completely and can't be started until it dries. So, all I could do is to start it at the very beginning and run it up to the first wave from big power boat :-(. My specific is that I have to place it on "extension" pole, so it is very easy to get it splashed and wet. Now I am looking on Yamaha 2.5 or Honda 2.0 and I like their design, where everything is covered and hidden inside cover, it is 4 strokes, quieter and cleaner. In case of Yamaha, I think that even if small wave come over, it should stay dry inside and running. I am not so sure that is also true for Honda, since it is more open and air-cooled, but it is lighter. Does anybody can give me some advice, or may be has some experience? It sounds funny, but I am looking for waterproof outboard engine ![]() Thanks, Peter. "Don White" wrote in message ... TheYamaha 2.5hp has better features also, including a true neutral gear and water cooling. Schoonertrash wrote in message ... I'd vote for Yamaha from experience. Also from seeing the number of Honda outboards piled up across the Pacific in many places. Most were said to be under warranty and most were fixable but they all had to be sent back to the factory. Yamaha allowed the repairs, if needed, to be done at the local dealers. The cost of sending them in (you pay one way they pay return) from out there was prohibitive. Easier to spend a few dollars more to begin with and buy something that lasted better and could be warranty repaired locally. Also Honda did not have the equivalent of the T-Series or work engines as does Yamaha. They advertise a wide range of speed for all needs. What that means to the guy in the commercial fishing small boat or with a sailboat is a huge waste of power band at the upper speeds. Honda tried to be everything to everybody in one engine. Yamaha just provided something that worked. As for two strokes .. .the biggest market in the world is slowly but surely banning them. Yamaha saw the writing on the wall. MST |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Outboard Performance Accessories | General | |||
Outboard security conundrum | Boat Building | |||
Recommend HP + mounting outboard - 27' Sailboat? | Boat Building | |||
Converting I/O to Outboard with Jack Plate | General | |||
Some General Outboard Info Needed | General |