"Peter Hendra" wrote in message
...
Am able to obtain some 8mm and 10mm second hand Staylock fittings.

Am I able to re-use the internal cone or is it necessary to buy new
ones?

Any advice appreciated

Peter,

Definitely buy new ones. Only use old ones in an emergency.

When ordering them, be sure to specify the wire size as well as the wire
type - for example is it 1x19 (most likely for standing rigging) or 7x19 or
7x7 or ? ?

If you have non-metric (fractional) wire, you should be careful. Some sizes
may use same fittings, but several do not. 8mm is very close to 5/16", but
10mm is not close to a fractional size.

Deal with a knowledgeable supplier and explain exactly what you are doing.
One good on line supplier is:

http://www.sailingservices.com/stalok/SL_product.htm

Have them send you installation instructions - you will need them to do a
good job.

I have no connection with them, but used to be in the rigging business
myself!

On Sat, 17 Mar 2007 14:43:24 -0500, "Noname"
wrote:

"Peter Hendra" wrote in message
.. .
Am able to obtain some 8mm and 10mm second hand Staylock fittings.

Am I able to re-use the internal cone or is it necessary to buy new
ones?

Any advice appreciated

Peter,

Definitely buy new ones. Only use old ones in an emergency.

When ordering them, be sure to specify the wire size as well as the wire
type - for example is it 1x19 (most likely for standing rigging) or 7x19 or
7x7 or ? ?

If you have non-metric (fractional) wire, you should be careful. Some sizes
may use same fittings, but several do not. 8mm is very close to 5/16", but
10mm is not close to a fractional size.

Deal with a knowledgeable supplier and explain exactly what you are doing.
One good on line supplier is:

http://www.sailingservices.com/stalok/SL_product.htm

Have them send you installation instructions - you will need them to do a
good job.

I have no connection with them, but used to be in the rigging business
myself!




Thanks very much for this advice. I know my level of ignorance.

cheers
Peter