Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 2
Default outboard repair advice needed: bad compression

1970's Suzuki Spirit 8. A 2 cylinder 8hp engine which won't fire. It
has gas and spark but the top cylinder measures 50lbs and the bottom
cylinder measures 105lbs. Is there any way the cylinder could have
gone bad just by sitting unused for two years. Is 105 about right? The
seller said it ran fine when I bought it. I know it's dumb but I just
got around to trying to start it. I need to find a ring kit for this?
Any ideas?
  #2   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 5,275
Default outboard repair advice needed: bad compression

the paddler wrote in
:

Is there any way the cylinder could have
gone bad just by sitting unused for two years.


Yes, when the rings rusted themselves to the cylinder walls from the WATER
that was in the cylinder when it was stored.

Is 105 about right? The
seller said it ran fine when I bought it. I know it's dumb but I just
got around to trying to start it. I need to find a ring kit for this?


I'll need more than just a ring kit....That's wishful thinking....
  #3   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 2
Default outboard repair advice needed: bad compression

On Sat, 21 Oct 2006 18:44:32 -0400, Larry wrote:

the paddler wrote in
:

Is there any way the cylinder could have
gone bad just by sitting unused for two years.


Yes, when the rings rusted themselves to the cylinder walls from the WATER
that was in the cylinder when it was stored.

Is 105 about right? The
seller said it ran fine when I bought it. I know it's dumb but I just
got around to trying to start it. I need to find a ring kit for this?


I'll need more than just a ring kit....That's wishful thinking....


so what is involved then? thank you.

  #4   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 5,275
Default outboard repair advice needed: bad compression

the paddler wrote in
:

so what is involved then? thank you.


Cylinder honing? Oversized pistons? New rings? Hard to tell what damage
is inside without pulling it all apart.



--
There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Jet Ski Advice Needed Tom General 0 June 27th 05 02:24 PM
Advice Needed for first boat Simon Hawkins General 2 January 30th 05 11:55 PM
Advice Needed: Yam 701 Starting To Smoke Too Much TravelByShipMICH Power Boat Racing 0 February 24th 04 02:00 AM
Some General Outboard Info Needed Tony V General 3 August 25th 03 11:24 PM
Advice on 18-22ft Bowrider...shaftdrive outboard BooBoo12321 General 0 August 17th 03 09:04 PM


All times are GMT +1. The time now is 03:08 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017