Peter Wiley wrote:
In article , Chuck Cox
wrote:
Where
would you envision operating such a system on your boat?

Probably, depending on size, in a dedicated locker aft, sealed from the
interior spaces similar to a locker for gas bottles. Tell me how big
it's likely to be, how much ventilation it needs and I may have other
ideas.

If we use a fuel pump, it'll probably be about the size of a shoebox.
If we use gravity, it'll be maybe 50% taller. If there is no integral
tank, maybe 1/2 a shoebox. The intake and exhaust will probably be
under 1" in diameter. For short runs, appropriate tubing of that
diameter would suffice.

--
Chuck Cox - SynchroSystems - Synchro.com
,
my email is politician-proof, just remove the PORK

In article , Chuck Cox
wrote:

Peter Wiley wrote:
In article , Chuck Cox
wrote:
Where
would you envision operating such a system on your boat?

Probably, depending on size, in a dedicated locker aft, sealed from the
interior spaces similar to a locker for gas bottles. Tell me how big
it's likely to be, how much ventilation it needs and I may have other
ideas.

If we use a fuel pump, it'll probably be about the size of a shoebox.
If we use gravity, it'll be maybe 50% taller. If there is no integral
tank, maybe 1/2 a shoebox. The intake and exhaust will probably be
under 1" in diameter. For short runs, appropriate tubing of that
diameter would suffice.

OK, a deck locker would work nicely. The other place I'd look at
putting it was belowdecks and use a coupling to external exhaust. That
size, it's not going to use sufficient air from belowdecks to be a
problem.

There may be other applications for something like this. I can think of
one or 2 supplying power to remote field parties where solar either
doesn't provide sufficient current or isn't reliable due to cloud. I'm
in the marine science research business. If you can produce one of
these things for less than $1K I'd buy one straight off for work, just
to play with. I already have 12 Honda gensets....

PDW

If I can buy a reliable unit for under $1K, install it in my engine room,
cool with seawater, hook to existing fuel system, have an optional switch
for on/off/auto, keep my battery bank charged, I will buy one...if works
well, I will tell everyone I know. This is what I want...battery bank
charging but not a large generator such as commonly seen on larger
powerboats. Affordable quiet power.

Glenn.
s/v Seawing
www.seawing.net


"Chuck Cox" wrote in message
...
Peter Wiley wrote:
In article , Chuck Cox
wrote:
Where
would you envision operating such a system on your boat?

Probably, depending on size, in a dedicated locker aft, sealed from the
interior spaces similar to a locker for gas bottles. Tell me how big
it's likely to be, how much ventilation it needs and I may have other
ideas.

If we use a fuel pump, it'll probably be about the size of a shoebox.
If we use gravity, it'll be maybe 50% taller. If there is no integral
tank, maybe 1/2 a shoebox. The intake and exhaust will probably be
under 1" in diameter. For short runs, appropriate tubing of that
diameter would suffice.

--
Chuck Cox - SynchroSystems - Synchro.com
,
my email is politician-proof, just remove the PORK

On Wed, 01 Mar 2006 05:36:23 GMT,
Glenn A. Heslop wrote:
If I can buy a reliable unit for under $1K, install it in my engine room,
cool with seawater, hook to existing fuel system, have an optional switch
for on/off/auto, keep my battery bank charged, I will buy one...if works
well, I will tell everyone I know. This is what I want...battery bank
charging but not a large generator such as commonly seen on larger
powerboats. Affordable quiet power.

Glenn.
s/v Seawing
www.seawing.net




ditto....

--
Jim Richardson http://www.eskimo.com/~warlock
Those who live by the sword are shot by those who don't.

On Tue, 28 Feb 2006 17:23:19 -0500,
Chuck Cox wrote:
Peter Wiley wrote:
In article , Chuck Cox
wrote:
Where
would you envision operating such a system on your boat?

Probably, depending on size, in a dedicated locker aft, sealed from the
interior spaces similar to a locker for gas bottles. Tell me how big
it's likely to be, how much ventilation it needs and I may have other
ideas.

If we use a fuel pump, it'll probably be about the size of a shoebox.
If we use gravity, it'll be maybe 50% taller. If there is no integral
tank, maybe 1/2 a shoebox. The intake and exhaust will probably be
under 1" in diameter. For short runs, appropriate tubing of that
diameter would suffice.


You're looking at something about 12" long, and maybe 6" on width and
height? really? heck, that sounds great. Or am I misunderstanding?


--
Jim Richardson http://www.eskimo.com/~warlock
Noise proves nothing. Often a hen who has merely laid an egg cackles
as if she laid an asteroid.
-- Mark Twain

Jim Richardson wrote:
You're looking at something about 12" long, and maybe 6" on width and
height? really? heck, that sounds great. Or am I misunderstanding?

That's about right.

--
Chuck Cox - SynchroSystems - Synchro.com
,
my email is politician-proof, just remove the PORK