What about the "buegel" (sp) anchor. I've been hearing alot of good things
about them. Widely used in Europe and now available in the states.


Jay


"Glenn Ashmore" wrote in message
news:2B5Md.113815$Wo.31960@lakeread08...

"Roger Long" wrote .
I need to buy a couple anchors for use in Maine and have been reading
the reviews on CruiseNews.net.

Does anyone think there is a real world difference between the "best"
and above average in these tests? Often tests like that just tell you
what was best on that particular day and location.

I like the look of the traditional plow and have a bow roller for one.
Is there a compelling reason to go with a Bruce or a Spade?

It is never a good idea to have two anchors of the same pattern. I sell
Spades but I am putting a CQR on the second roller.

In the New England area I would sugggest either a CQR or a steel Spade.
The
Bruce sets very easily but it just doesn't have the holding power. The
Spade sets very reliably if you let it settle a few seconds before putting
any tension on the rode and resets quickly on its own. Which is kinda
counter intuitive as it is usually under tension when it resets. (I
haven't
figured that out yet.) It realigns extremely well IF you use a proper
size
model. The CQR doesn't have quite the holding power of the Spade in most
bottoms but it seems to perform a little better in soft mud.

My customers must like their Spades as I offer 30 day return privileges
for
any reason and after more than 200 anchors nobody has returned one yet.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

We have a 42' ketch that we have sailed the east coast of Australia
and are now in Phuket. We use the Brugel (25 Kg) as our primary anchor
and it is great to use. Sets quickly, resets the same and easy to stow
as it has no moving parts. We even had a second one made in Aust. All
up we carry 4 anchors, 2 Brugels, 1 Danforth and a plough. The only
time we have had a problem is anchoring in silt at the mouth of a
river.
Tony
S/V Ambrosia

In article , "just me" wrote:
What about the "buegel" (sp) anchor. I've been hearing alot of good things
about them. Widely used in Europe and now available in the states.


Jay


Jay, for info on the Buegel Anchor try:

http://www.inter-yacht.com/Buegel/BuegelIntro.html