| Home |
| Search |
| Today's Posts |
|
#13
|
|||
|
|||
|
There is no "resistance problem" The Milwaukee is a right angle drill,
D handle drill, approx 18" long. It is easily held and kick back is readily controlled. Since I do not have a generator or full sized inverter on board, I prefer the Cordless unit. A small Inverter handles the recharging. Also, it is Cordless, a major convenience. Respectfully, you are overthinking this matter. $350 all up is your downside risk and you can sell it on ebay if you are not happy. Since I introduced this setup to my marina, 3 other mid size boat sailors have followed suit. A Freedom 36, a Nonsuch 36, a C & C 40 and a Hunter 40 all use this system. On Sat, 30 Oct 2004 08:33:38 -0500, Courtney Thomas wrote: Marc, What do you do, if anything, regarding the previously referred to [potential] problem of....the drill's reaction force of ~50 lbs ? Evan suggested a tether. Thoughts ? Also, since a much less expensive AC drill can be had with similar capabilities, why did you think the DC unit worth the difference, especially since the batteries must be recharged anyway ? Appreciatively, Courtney Marc wrote: The Milwaukee 3109-24 right angle 18 volt drill delivers 600 inch lbs of torque at the low side rpm of 350. I use this drill with a winch head bit on the low speed side of my barient 27's to hoist a 500 sf full batten main. Works out to approx 30 rpm at the winch at full speed. Works like a charm. I get 4 hoists to a charge. No drawbacks and I can decouple the tool and use it for other tasks. Buy an extra battery and charge it off your inverter. $350.00 all up. On Fri, 29 Oct 2004 10:09:50 -0500, Courtney Thomas wrote: I would like to try powering my main winches [Barient 28s] by a [preferably] portable drill/impact wrench/etc., as at least an emergency option. Has anyone successfully done this ? If yes, how'd you determine what you needed ? I see that there are now numerous new portable ones that range up to 24v. If portable ones are insufficient, how 'bout such as DeWalt and Milwaukee 1/2" corded models ? What has been found unsatisfactory about such an application ? Appreciatively, Courtney |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| What does MIT say about ionization and lightning?? | ASA | |||
| Cordless drill as Electric Winch Handle | General | |||
| Electric winch bit | ASA | |||
| The Boob's electric winch | ASA | |||
| Which lines for the electric winch? | Cruising | |||