"Flying Pig" wrote in message
...
I'm leaving out the various conversations from contributors just to not get
in a ****ing match :{))

Richard Kollmann, a reasonably respected marine refrigeration guy, has been
playing this tune for quite a while.

The overheat function is supposed to be in the controller which, if IT'S
cool enough, won't do anything. If the outgoing gas (with minute traces of
oil in it, of course) gets hot enough (as apparently it did, based on my
having to replace an o-ring on the high pressure connector), it doesn't have
to be in the compressor to change state, either. So, unless whomever your
builder is had put in a sensor IN/ON the compressor, an overheat might well
be missed.

Well, that sure is a defective engineering design. It's a simple
matter to place a thermostat in or on the condenser which, when
it reaches a preset critical temperature, switches the unit off.

An overheat failsafe that's elsewhere is African engineering at best.

Frigoboat should be ashamed of such an inferior design.

--
Sir Gregory

" Sir Gregory Hall, Esq·" åke wrote in message
...
"Flying Pig" wrote in message
...
I'm leaving out the various conversations from contributors just to not
get in a ****ing match :{))

Richard Kollmann, a reasonably respected marine refrigeration guy, has
been playing this tune for quite a while.

The overheat function is supposed to be in the controller which, if IT'S
cool enough, won't do anything. If the outgoing gas (with minute traces
of oil in it, of course) gets hot enough (as apparently it did, based on
my having to replace an o-ring on the high pressure connector), it
doesn't have to be in the compressor to change state, either. So, unless
whomever your builder is had put in a sensor IN/ON the compressor, an
overheat might well be missed.

Well, that sure is a defective engineering design. It's a simple
matter to place a thermostat in or on the condenser which, when
it reaches a preset critical temperature, switches the unit off.

An overheat failsafe that's elsewhere is African engineering at best.

Frigoboat should be ashamed of such an inferior design.

--
Sir Gregory


Kollmann has several areas of design complaint about the Frigoboat system...

L8R

Skip

--

Morgan 461 #2
SV Flying Pig KI4MPC
See our galleries at www.justpickone.org/skip/gallery !
Follow us at http://groups.yahoo.com/group/TheFlyingPigLog
and/or http://groups.google.com/group/flyingpiglog

When a man comes to like a sea life, he is not fit to live on land.
- Dr. Samuel Johnson

On Friday, November 8, 2013 at 1:27:20 PM UTC-8, Flying Pig wrote:
" Sir Gregory Hall, Esq�" �ke wrote in message
...
"Flying Pig" wrote in message
...
I'm leaving out the various conversations from contributors just to not
get in a ****ing match :{))

Richard Kollmann, a reasonably respected marine refrigeration guy, has
been playing this tune for quite a while.

The overheat function is supposed to be in the controller which, if IT'S
cool enough, won't do anything. If the outgoing gas (with minute traces
of oil in it, of course) gets hot enough (as apparently it did, based on
my having to replace an o-ring on the high pressure connector), it
doesn't have to be in the compressor to change state, either. So, unless
whomever your builder is had put in a sensor IN/ON the compressor, an
overheat might well be missed.

Well, that sure is a defective engineering design. It's a simple
matter to place a thermostat in or on the condenser which, when
it reaches a preset critical temperature, switches the unit off.

An overheat failsafe that's elsewhere is African engineering at best.

Frigoboat should be ashamed of such an inferior design.

--
Sir Gregory


Kollmann has several areas of design complaint about the Frigoboat system....

L8R

Skip

--
Kollmann has several areas where he doesn't know his ass from a hole in the ground. He has books full of mis-information and half-truths. Take what he says with a lot of salt....

MMCBRIDDE said:

"Kollmann has several areas where he doesn't know his ass from a hole in the
ground. He has books full of mis-information and half-truths. Take what he
says with a lot of salt...."

Thanks for the heads up. I see you sell many brands of systems; apparently
you have followed my saga of the Frigoboat failure, as well.

So, would you mind illustrating where it is that RK was wrong, or
misinforming, in my case?

Or was this a general warning for the remaining 3 people who read this
newsgroup (Neal harassers excepted)?


FWIW, I'm finally coming to terms with the voracious appetite for electrons
in the new SeaFrost air and water cooled system (which works perfectly - but
with air and water near 80, averages 7A - that is over extended periods -
e.g. 8 hours, 56AH consumption). The colder it gets, the better (less
average amps) that number is.

It's a dream to defrost by comparison to my SS-fronted,
largest-evaporator-plate-Frigoboat-offers previous - but uses something on
the order of 50-100% more electrons, particularly since the compressor is in
the engine room; with a keel cooler, it's of no consequence; with air (never
run the engine, and have it never above 70, it does well) and water needed
to cool the SeaFrost, not so much...

L8R

Skip


Morgan 461 #2
SV Flying Pig KI4MPC
See our galleries at www.justpickone.org/skip/gallery !
Follow us at http://groups.yahoo.com/group/TheFlyingPigLog
and/or http://groups.google.com/group/flyingpiglog

When a man comes to like a sea life, he is not
fit to live on land.
- Dr. Samuel Johnson