"Bruce in Bangkok" wrote in message
...
On Wed, 6 Nov 2013 17:12:41 -0500, " Sir Gregory Hall, Esq·"
åke wrote:

"Flying Pig" wrote in message
...
Frigoboat - The Smoking Gun (or compressor)

This is a tale of the death of a Frigoboat keel cooler installation.


I killed it. Whether it was running the keel cooler out of the water, or
just the conditions in the yard, Clay, my referred pro - and by now close
acquaintance, as I "assisted" in his work aboard - in consulting with
several other refrigeration professionals, learned why our efforts - which
included the welding in of a cap tube filter, adding a filter dryer,
evacuation and recharge, flushing the system through both service ports,
followed by a nitrogen blast, isolating the evaporator (the suspected
problem point, which was true, but not the "real" problem) and successive
nitrogen blast/suck vacuum on both sides of the evaporator, alternating,
repeatedly, to no avail) - were fruitless.


trim

If you believe that crap about the oil somehow changing
state and clogging up the works then you're very easily
led around by the nose. Trained by Lydia? :-)

And yet again the intrepid Capt. Neil advances into the fray.... and
****es all over his toes.

You ignorant ass, yes oil does "change state" when over heated, and if
you had the brains of a cockroach you would have looked into the facts
before you posted, rather then make a stupid statement and get
corrected.

Try:
http://highperformancehvac.com/compr...gnosis-repair/

sporlanonline.com/literature/misc/10-207.pdf

http://www.achrnews.com/articles/rea...or-overheating

or any of the other 27,000 returns that google shows when searching
for "change in overheated refrigeration oil"


All that is but a non sequitur, Brucie-boi!

Unfortunately, you ignorantly chose to ignore the main point
of my response which point is, don't believe a bunch of crap
about overheated oil being the problem. *If* there, indeed, was
overheated oil then that indicates the fail-safe circuitry for an
overheated compressor was inoperable. THAT is a warranty
problem and THAT is why the Rubes at Frigiboat chose to
claim it was Skippy's problem for overheating the compressor
when, in fact, it was Frigiboat's problem because the overheat
censor/circuitry failed to work.

Here again is the main point which you edited out because
you ignorantly chose to ignore it because it serves to debunk
your childish ad hominem attack.

"There is supposed to be a fail-safe circuit that shuts down
an overheating compressor before it becomes damaged.
Even my cheapo Adler Barbour has one of those."


--
Sir Gregory