Home |
Search |
Today's Posts |
#20
posted to rec.boats.cruising
|
|||
|
|||
Sail Trim
Bruce wrote:
On Sun, 03 Jul 2011 14:21:25 -0500, CaveLamb wrote: Copy all that, Wilbur. I have a boltrope with a slug at each end of the foot. The one I think I may need to add would be at the foot of the luff. (I think you had the picture of it right from what you said) The tack/luff pulls aft below the bottom luff slug, which is a bit over a foot up from the tack corner. The tack fitting is an inverted U thing that pins through the gooseneck laterally. It can swing fore/aft. So any pressure on the sail, or tension on the outhaul, pulls the bottom tack corner of the sail aft of vertical (of the rest of the luff). That seems to be the source of the odd wrinkle at the aft end of the shelf. I tied a line through the tack ring, around the mast, and pulled the foot forward an inch or two. That made the shelf look a lot better. Will take a closer look at it in the next few days and discuss it with the sail loft before messing with it though... The tack fitting is often is built into the boom gooseneck. If you are making a new fitting (I thought I saw you on another group) you might incorporate that. See http://www.sparcraft.fr/fr/produits/...1.jpg?54682,18 for an example. If you reef using only a reefing line on the leech you can incorporate a hook at the gooseneck for the luff reefing cringle. If you are using a loose footed sail (the movie wasn't very clear) I wouldn't use a slug at either end, assuming that the gooseneck fitting holds the tack properly. Unless the sail maker tells you can I wouldn't use a slug on the clew as usually a loose footed sail is designed to be attached only at the tack and the clew. Adding one additional attaching point might concentrate stress where it wasn't intended. Cheers, Bruce Hi Bruce, No, it's not loose footed. I'm far too hung-up for a loose footed main sail. :0 Yes. I understand what you are saying about an unexpected stress concentration. That's why I'll ask the loft about it before doing anything. My gooseneck is similar to the one you showed, except that the inverted U-ie is a bit further aft on mine... Sorry this pics is more from underneath. But it is in focus! Can you see that extra inch aft? http://www.home.earthlink.net/~cavelamb/DSCF0080a.JPG By the way, the quote on the replacement fitting was $275. That's actually not bat for what I'd get. But it's a bit over budget at the moment. I patched up the old fitting and pt it back in service. For now... -- Richard Lamb http://www.home.earthlink.net/~cavelamb http://www.home.earthlink.net/~sv_temptress |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sail trim from the pilothouse | ASA | |||
Sail trim from the pilothouse | ASA | |||
Main Sail Trim | ASA | |||
Sail trim question ;) | ASA | |||
Sail Trim? | ASA |