Home |
Search |
Today's Posts |
#6
![]()
posted to rec.boats.cruising,rec.boats.building
|
|||
|
|||
![]()
Skip,
Simplest . . . if you still have the can . . . read the label. If not contact the mfg. {the Internet is wonderful . . . sometimes}. Ask about the SPECIFIC product, not just 'your ablative paints'. I've been through 2 'options' before using the present 'preparation' . . . the West Marine 'house brand' ablative {CPP Plus . . a 'Doppleganger' to Interlux Micron CSC}. To quote - '. . . provides a smooth, self-polishing finish with no paint build up. The more coats you apply, the longer it lasts.' And '. . . For CPP & PCA the launch widow is INDEFINITE {my caps}. Paint in good condition will reactivate upon launch'. By it's very nature an 'ablative' is NOT a 'leaching' finish - it's a 'self-polishing' which means it wears away {'carrier' and 'biocide'}as it is 'used'. It is not as 'exotic' as the 'Modern Stuff' {unless you count West's PCA or Interlux's Micron Extra - both have Irgarol for slime 'prevention'} and doesn't have a high biocide load - with it's 'mechanics' it doesn't need it. For ablatives, THREE coats is the recommended initial application - again from the 'more is better' school. Personally, I use this to my advantage . . .. and maybe that is why 'they' recommended it . . . without the original reasoning. The first coat is your 'flag' coat. It is a DIFFERENT color from the subsequent coats {In my case I use RED and over-coat with BLUE}. I also give a bit more paint to specific 'wear areas' - chines, keel, cu****er. When the boat is hauled out, and bottom washed before winter storage, a quick look is all that is needed to check the paint condition. The 'FLAG COLOR' will show where the anti-fouling has almost worn away and needs 'refreshing'. Regards & Good Luck, Ron Magen Backyard Boatshop "Skip Gundlach" wrote SNIP 2-year refit. It was newly ablative bottom painted when we bought it. A local asserts that the bottom paint is dead, and it will have to be redone. How say you who have experienced this? Not hard, ablative, out of the water for a couple of years essentially immediately after application? SNIP |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Ablative bottom paints | ASA |