Home |
Search |
Today's Posts |
#7
|
|||
|
|||
Questions about Fiberglassing Wood - OurBoat.jpg (0/1)
Glenn gets extra credibility because he's not trying to sell anything here.
Matt Langenfeld wrote: ok let's not jump this guy and tell him he's wrong for wanting to do this project until he has a chance to better describe his situation. We could all be wrong here. Glenn Ashmore wrote: I know how to estimate your glass requirements but it would be immoral to tell you. I will repeat: Fiberglass sheathing an older carvel planked hull is a sure way to a quick death. It should only be done to squeeze an extra few years out of a hull that is unsalvageable otherwise. If you want advice from the real experts, sign into the Woodenboat Magazine repair forum at http://www.woodenboat.com/ and ask. 90% of those guys restore classic wooden boats. Some have several hulls under their belts and know what they are doing. You will definitely get some responses. That question is like waving a red flag at a bull on that forum. As to the paint: Marine topsides paints should never be applied below the waterline. A high quality anti-fouling bottom paint is made for that. There are many on the market with various formulations. Some work better in warm water and others in cold. It is best to ask around your marina/boatyard and find out which brand works best in your area. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wood rot in sheathed 1876 Smack | Boat Building | |||
Composite stringer grids | General | |||
2 newbie questions... | General | |||
Steam bending basics?? | Boat Building | |||
Lumber questions | Boat Building |