Home |
Search |
Today's Posts |
#4
|
|||
|
|||
Brazilian Teak
I must correct myself. Did some checking and the trade name "Brazilian
teak" is actually Cumaru aka Ebo. Dipteryx, odorata, not teak at all. Similar in density, strength and durability to teak but less dimensionally stable. That is going to lead to no end of confusion because there are several large real teak plantations starting to harvest in Brazil. Jim Conlin wrote: Is it the same species, tectona grandis ? Glenn Ashmore wrote: Brazilian and Central American teak is plantation grown using a lot of agricultural technology. It grows faster so the rings are thicker and the grain is a little more coarse. It is still resistant to rot and actually has a little better non-skid properties but it somewhat softer so it does not weather as well and has to be maintained more carefully. South East Aisian teak is almost impossible to get these days because of some world wide bans. What is available is usually smuggled out of Burma. x wrote: Is Brazilian teak as good as the stuff from S.E Asia? -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Teak Finish | Boat Building | |||
Ipe vs. Teak | Boat Building | |||
Which teak seam calk? | Boat Building | |||
FS: Teak Deck Planks | Boat Building | |||
Teak Surfing... doesn't anyone read the papers anymore??? | General |