| Home |
| Search |
| Today's Posts |
|
#12
|
|||
|
|||
|
Old Nick ) writes:
On Thu, 4 Mar 2004 19:13:26 +1100, "David Flew" vaguely proposed a theory ......and in reply I say!: I must be totally inept. I thought _every_ job was like this......especially the bit about the prop G moreso on these lightweight space-saving environmental automobiles. just discovered to change the thermostat I have to remove the distributor. not as bad as one Mazda on which to change the timing belt you have to lift the engine out of the vehicle. to change powder room faucetts recently I had to take the wall hung sink down which meant cleaning and painting the wall behind the sink. while I was at it I decided to wire brush the surface rust off the hanging plate and gave it a couple coats of rust penetrating paint, all of which required drying time. -- ------------------------------------------------------------------------------ William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-freenet email must have "notspam" in subject or it's returned |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Thinking of building your first boat? | Boat Building | |||
| I'm building my first Trimaran... | Boat Building | |||
| Need books, articles, website to design a canoe (concrete) | Boat Building | |||
| Building Catamarans in Brazil | Boat Building | |||
| Double canoe wooden pontoon boat??? | Boat Building | |||