Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
bowgus
 
Posts: n/a
Default Where is hull design going?

Check this (twin keel) article out ... the site has some other interesting
articles ... http://www.boatbuilding.com/content/...els/index.html


"gjoyce" wrote in message
m...
I figured this erudite group could point me in the correct direction.
I've been
cruising thru a variety of naval research sites, but was wondering
what you
designer-types might think.

Where do you see hull design - shapes, materials, coatings,
propulsion, etc. - going in the near - and not so near - future?


Thanks

Gary P. Joyce



  #2   Report Post  
Marty
 
Posts: n/a
Default Where is hull design going?

Twin keel design does not seem very new to me - I am sure I have seen it
before, just can't remember where right now...

bowgus wrote:
Check this (twin keel) article out ... the site has some other interesting
articles ... http://www.boatbuilding.com/content/...els/index.html


"gjoyce" wrote in message
m...

I figured this erudite group could point me in the correct direction.
I've been
cruising thru a variety of naval research sites, but was wondering
what you
designer-types might think.

Where do you see hull design - shapes, materials, coatings,
propulsion, etc. - going in the near - and not so near - future?


Thanks

Gary P. Joyce





  #3   Report Post  
bowgus
 
Posts: n/a
Default Where is hull design going?

It's not new ... but it seems to have some unrecognized features ... besides
being able to park in the mud and stay upright. My neighbour up the way had
a twin keel ... I thought it kindof oddball ... but having read the article
.... very interesting.

"Marty" wrote in message
. ..
Twin keel design does not seem very new to me - I am sure I have seen it
before, just can't remember where right now...

bowgus wrote:
Check this (twin keel) article out ... the site has some other

interesting
articles ... http://www.boatbuilding.com/content/...els/index.html


"gjoyce" wrote in message
m...

I figured this erudite group could point me in the correct direction.
I've been
cruising thru a variety of naval research sites, but was wondering
what you
designer-types might think.

Where do you see hull design - shapes, materials, coatings,
propulsion, etc. - going in the near - and not so near - future?


Thanks

Gary P. Joyce







  #4   Report Post  
Rodney Myrvaagnes
 
Posts: n/a
Default Where is hull design going?

On Fri, 14 Nov 2003 00:48:14 GMT, "bowgus" wrote:

It's not new ... but it seems to have some unrecognized features ... besides
being able to park in the mud and stay upright. My neighbour up the way had
a twin keel ... I thought it kindof oddball ... but having read the article
... very interesting.

"Marty" wrote in message
...
Twin keel design does not seem very new to me - I am sure I have seen it
before, just can't remember where right now...

bowgus wrote:
Check this (twin keel) article out ... the site has some other

interesting
articles ... http://www.boatbuilding.com/content/...els/index.html

Unrecognized features? It trades sailing ability for the ability to
sit upright when the tide goes down. If you don't need the latter, it
is all downside. The same hull with a single fin keel incorporating
the same lead will always sail better, unless it is a horribly
incompetent design.

If the only place you can keep your boat dries out at low tide, then
you really want a twin keel..

Otherwise, why even consider it?



Rodney Myrvaagnes NYC J36 Gjo/a


"Curse thee, thou quadrant. No longer will I guide my earthly way by thee." Capt. Ahab
  #5   Report Post  
William R. Watt
 
Posts: n/a
Default Where is hull design going?

"bowgus" ) writes:
It's not new ... but it seems to have some unrecognized features ... besides
being able to park in the mud and stay upright. My neighbour up the way had
a twin keel ... I thought it kindof oddball ... but having read the article
... very interesting.


someone has been advertising a 21ft twin keel boat in our local sailing
newsgroup, ott.re.sailing.
--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Source of hull line dwgs, accuracy for a half_hull 0_Qed Boat Building 3 September 23rd 04 12:58 PM
Cathodic Protection for Aluminum Hull - Need Help Matt Lang General 9 July 25th 04 07:02 PM
Hull Construction Shirley Tremblay General 1 July 15th 04 08:20 PM
Possible Cracks in Hull (fiberglass) Y General 4 May 26th 04 03:38 PM
depth finder "Inside" alum hull Doug Kanter General 1 March 16th 04 06:13 AM


All times are GMT +1. The time now is 09:53 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017