FGCI is fine, but it is room-temperature only (60F or higher for proper
cure). Otherwise, it's fine.

Brian


Hmm, never found that. Even though I'm in FL (north), I've used it down to
the 40's with great success. In fact, it's the most forgiving epoxy I've ever
used. I've even laid up molded boats with it. Once, I mixed a batch of 2:1
backwards! No more beer with lunch ). I realized it and didn't use it, but
it kicked and cured normally and seemed as strong as the leftovers I have from
normal mixes. I used to be a die hard West man, then tried MAS which was very
inconsistent (for me). Now I stick with the FGCI which is cheap and excellent
material (no affiliation).
Greg Sefton