Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() |
#2
![]() |
|||
|
|||
![]()
What you want is called an "O" ring. Go to any store selling seals
(look in the Yellow Pages) and you should be able to locate what you want. If you can't find the exact diameter you may need to buy a "O" Ring Kit which contains the proper thickness material and allows you to glue up the correct diameter ring. On Sat, 25 Sep 2004 20:31:14 -0500, Maynard G. Krebbs wrote: On 25 Sep 2004 07:47:03 -0700, (Chuck Baier) wrote: I am looking for a source for ROUND gaskets for my bronze ports. I have found the square ones at Defender but the grooves in the ports are round and the square ones don't seat well no matter what I do. Any sources will be appreciated. Chuck You could try a decent hardware store. Not a Home Depot but your local hardware store. The have different size sheets of neoprene you could but gaskets out of. Mark E. Williams |
#3
![]() |
|||
|
|||
![]()
Totally off topic:
"Maynard G. Krebbs!" Wow. There must be very few of us left out here who actually enjoyed that great black and white show. And to think it's star went on to be the great Gilligan. Nice to see you Maynard. "Maynard G. Krebbs" wrote in message ... On 25 Sep 2004 07:47:03 -0700, (Chuck Baier) wrote: I am looking for a source for ROUND gaskets for my bronze ports. I have found the square ones at Defender but the grooves in the ports are round and the square ones don't seat well no matter what I do. Any sources will be appreciated. Chuck You could try a decent hardware store. Not a Home Depot but your local hardware store. The have different size sheets of neoprene you could but gaskets out of. Mark E. Williams |
#4
![]() |
|||
|
|||
![]() |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
question about port of origin | General | |||
legality of port clearance and ships registration papers. | Cruising | |||
Turn to port or staraboard? | ASA |