Home |
Search |
Today's Posts |
#8
![]()
posted to alt.sailing.asa
|
|||
|
|||
![]()
"Edgar" wrote in message
... "Capt. JG" wrote in message ... wrote in message ups.com... I need to replace my the halyard for main main sail. How can I do this without climbing the mast? The old halyard is still in place. Thanks You can cut off whatever is at the business end of the old halyard and either sew the new one on temporarily or attach a mouse (light line) to it with tape and pull it through... I've done the latter several times... just pull gently otherwise you might separate the two lines. -- "j" ganz @@ www.sailnow.com What a lengthy argument about the simplest of jobs which I have done many times! You _must_ use a messenger line unless your boat is very small because it is very hard to sew two fullsize ropes together with a strong joint that will not bulge and jam in the sheave at the top. Also Jon's suggestion of tape is a no-no because as the new halliard is hauled up there is every chance the whole thing will come unstuck and you will lose the end and then you will have to get yourself hauled up on the spinnaker halliard to reeve the new one or drop a 'mouse' down (if the halliard runs inside the mast). My mast is 50' high and by the time you have hauled 50' of rope up to the top the weight on the join is quite substantial and the additional tug as the joint goes over the sheave may prove to be the last straw. The messenger line can be quite small because synthetic line is very strong and this enables you to use a sail needle and incorporate it into the old rope in such a way that it will stand very considerable force. Take a bit of trouble over this and save yourself a big hassle. I have four halliards going to the top of my mast and like to take them down periodically and put them through the washing machine. Cleans them and softens the rope which may have developed stiffness due to stress and time. Well, I used tape on my Sabre for just this situation. I put a couple of stitches in it also to hold the two pieces together. Nothing wrong with the messenger technique you mentioned either. -- "j" ganz @@ www.sailnow.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Winchless jib halyard | Cruising | |||
Winchless Halyard | Cruising | |||
Main halyard winch, 1sp. or 2sp? | Cruising | |||
How to replace carburator fuel filter on OMC cobra 4.3 | General | |||
$#%~#^%@ Halyard piston Shackle Lanyard! | Cruising |