Fly it proudly while you can. We may soon be flying the flag of Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg

jim wrote:
Fly it proudly while you can. We may soon be flying the flag of Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg


I haven't noticed one iota of true "Americanism" from you or Herring. If
you two are flying these flags, it is under false pretenses. The two of
you represent the worst that America has produced, a pair of racist,
hate-filled assholes.

On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg

Yeah, mine's made. I put a threaded joint at the top of the vertical piece,
and add about a foot horizontally at the base of the section holding the
flag (using another 45 degree piece). Eventually we'll put a name sign on
it. It works very well!
--
John H.

John H. wrote:
On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg

Yeah, mine's made. I put a threaded joint at the top of the vertical piece,
and add about a foot horizontally at the base of the section holding the
flag (using another 45 degree piece). Eventually we'll put a name sign on
it. It works very well!

Send me a picture.

jim wrote:
John H. wrote:
On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of
Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg

Yeah, mine's made. I put a threaded joint at the top of the vertical
piece,
and add about a foot horizontally at the base of the section holding the
flag (using another 45 degree piece). Eventually we'll put a name sign on
it. It works very well!

Send me a picture.



Planning to build up your wrist?

On Wed, 08 Oct 2008 16:31:11 -0400, jim wrote:

John H. wrote:
On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg

Yeah, mine's made. I put a threaded joint at the top of the vertical piece,
and add about a foot horizontally at the base of the section holding the
flag (using another 45 degree piece). Eventually we'll put a name sign on
it. It works very well!

Send me a picture.

I'll do so in a couple weeks. Right now the trailer is at the yard, but
we're going to Niagara Falls when our friends from the Netherlands get
here. It's almost identical to this one, with a threaded joint at the top
of the vertical section. That makes it a little less bulky for storage in
the trailer.

http://i98.photobucket.com/albums/l2...akePark032.jpg


--
John H.

"John H." wrote in message
...
On Wed, 08 Oct 2008 16:31:11 -0400, jim wrote:

John H. wrote:
On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of
Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg

Yeah, mine's made. I put a threaded joint at the top of the vertical
piece,
and add about a foot horizontally at the base of the section holding the
flag (using another 45 degree piece). Eventually we'll put a name sign
on
it. It works very well!

Send me a picture.

I'll do so in a couple weeks. Right now the trailer is at the yard, but
we're going to Niagara Falls when our friends from the Netherlands get
here. It's almost identical to this one, with a threaded joint at the top
of the vertical section. That makes it a little less bulky for storage in
the trailer.

http://i98.photobucket.com/albums/l2...akePark032.jpg


--
John H.

Thats cool. Maybe I'll do that and hang a McCain Palin sign on it.

On Wed, 8 Oct 2008 17:43:46 -0400, "Robert Jones"
wrote:


"John H." wrote in message
.. .
On Wed, 08 Oct 2008 16:31:11 -0400, jim wrote:

John H. wrote:
On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of
Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg

Yeah, mine's made. I put a threaded joint at the top of the vertical
piece,
and add about a foot horizontally at the base of the section holding the
flag (using another 45 degree piece). Eventually we'll put a name sign
on
it. It works very well!

Send me a picture.

I'll do so in a couple weeks. Right now the trailer is at the yard, but
we're going to Niagara Falls when our friends from the Netherlands get
here. It's almost identical to this one, with a threaded joint at the top
of the vertical section. That makes it a little less bulky for storage in
the trailer.

http://i98.photobucket.com/albums/l2...akePark032.jpg


--
John H.

Thats cool. Maybe I'll do that and hang a McCain Palin sign on it.

Super idea! Now I wish mine wasn't in the trailer.
--
John H.

John H. wrote:
On Wed, 08 Oct 2008 16:31:11 -0400, jim wrote:

John H. wrote:
On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of Obamastan.

Did you make your pole? I did this in about 10 minutes , from memory.
Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg
Yeah, mine's made. I put a threaded joint at the top of the vertical piece,
and add about a foot horizontally at the base of the section holding the
flag (using another 45 degree piece). Eventually we'll put a name sign on
it. It works very well!
Send me a picture.

I'll do so in a couple weeks. Right now the trailer is at the yard, but
we're going to Niagara Falls when our friends from the Netherlands get
here. It's almost identical to this one, with a threaded joint at the top
of the vertical section. That makes it a little less bulky for storage in
the trailer.

http://i98.photobucket.com/albums/l2...akePark032.jpg

Go ride the Maid of the Mist on the the Canadian side. Much better boat
ride up to the falls.

BAR wrote:
John H. wrote:
On Wed, 08 Oct 2008 16:31:11 -0400, jim wrote:

John H. wrote:
On Wed, 08 Oct 2008 14:59:00 -0400, jim wrote:

Fly it proudly while you can. We may soon be flying the flag of
Obamastan.

Did you make your pole? I did this in about 10 minutes , from
memory. Had to put some weight in the tail piece to balance it.

http://i35.tinypic.com/wk5jm8.jpg
Yeah, mine's made. I put a threaded joint at the top of the vertical
piece,
and add about a foot horizontally at the base of the section holding
the
flag (using another 45 degree piece). Eventually we'll put a name
sign on
it. It works very well!
Send me a picture.

I'll do so in a couple weeks. Right now the trailer is at the yard, but
we're going to Niagara Falls when our friends from the Netherlands get
here. It's almost identical to this one, with a threaded joint at the top
of the vertical section. That makes it a little less bulky for storage in
the trailer.

http://i98.photobucket.com/albums/l2...akePark032.jpg

Go ride the Maid of the Mist on the the Canadian side. Much better boat
ride up to the falls.


There's a barrel ride he ought to try.