Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
sherwindu wrote:
Was out at the boat to put on the cover and button things up. I tried some of the On and Off on some residual places the other cleaners could not clean. It really works. Next season should be a lot easier. By the way, I spent some time draining my fuel lines to the outboard and inline filter of residual gasoline. I think that is one place where gas can go bad over the winter and screw things up the next season. Sherwin, You are correct that the old gas can cause real problems in the spring time, but you really want to fill the tank with gas to reduce condensation and add Fuel Stabilzer to the gas prior to pumping the gas in. Then run the engine for 10 minutes to make sure you have the fuel stabilizer in the filter and carbs/injectors. After 10 min. fog the engine to prevent rust in the cylinders. If this is a 4 stroke, while the engie is still warm, you will then want to change the oil and filter. Boat/US used to have a nice write up on how to winterize your boat and both I/O and OB engines. |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]() "Reginald P. Smithers III" wrote in message . .. sherwindu wrote: Was out at the boat to put on the cover and button things up. I tried some of the On and Off on some residual places the other cleaners could not clean. It really works. Next season should be a lot easier. By the way, I spent some time draining my fuel lines to the outboard and inline filter of residual gasoline. I think that is one place where gas can go bad over the winter and screw things up the next season. Sherwin, You are correct that the old gas can cause real problems in the spring time, but you really want to fill the tank with gas to reduce condensation and add Fuel Stabilzer to the gas prior to pumping the gas in. Then run the engine for 10 minutes to make sure you have the fuel stabilizer in the filter and carbs/injectors. After 10 min. fog the engine to prevent rust in the cylinders. If this is a 4 stroke, while the engie is still warm, you will then want to change the oil and filter. Boat/US used to have a nice write up on how to winterize your boat and both I/O and OB engines. I drain the manifolds and the sand trap if the weather is forecast to be cold. Other than that, I use my boat during the winter. Fact is, crab season starts Saturday. |
#3
![]()
posted to rec.boats
|
|||
|
|||
![]()
Reginald,
My lawnmower repair man, who has had lot's of experience with small engines, insists that fuel stabilizers, like Stabil, do not last much longer than a few months. If that is true, fuel with these stabilizers can go bad over the winter storage. My outboard tank is removable, so next spring I will inspect it and let it dry out if any water has condensed inside. I use Stabil in my fuel all season, so any traces of gas in the engine possibly have some protection. However, I think the best protection is to run the engine dry. I agree about the fogging though. Sherwin "Reginald P. Smithers III" wrote: sherwindu wrote: Was out at the boat to put on the cover and button things up. I tried some of the On and Off on some residual places the other cleaners could not clean. It really works. Next season should be a lot easier. By the way, I spent some time draining my fuel lines to the outboard and inline filter of residual gasoline. I think that is one place where gas can go bad over the winter and screw things up the next season. Sherwin, You are correct that the old gas can cause real problems in the spring time, but you really want to fill the tank with gas to reduce condensation and add Fuel Stabilzer to the gas prior to pumping the gas in. Then run the engine for 10 minutes to make sure you have the fuel stabilizer in the filter and carbs/injectors. After 10 min. fog the engine to prevent rust in the cylinders. If this is a 4 stroke, while the engie is still warm, you will then want to change the oil and filter. Boat/US used to have a nice write up on how to winterize your boat and both I/O and OB engines. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Bush ( a boater) has slime-mold beetle named after him | General | |||
carb cleaner? | General | |||
Fender slime/goo | General | |||
getting rid of hull slime? | General |