Home |
Search |
Today's Posts |
#5
![]()
posted to rec.boats.paddle
|
|||
|
|||
![]()
Michael Daly wrote:
but the main reason manufacturers stopped making polypro is that it lasts so long that they can't sell replacement garments. Polypro lasts long (I still have some that is usable and was purchased in the '70s) but it can't hold an antibacterial treatment. Hence the smell associated with polypro. That is a major reason for the popularity of polyester fabrics over polypro. The anti-smell chemicals added to polyester only last several launderings, so I don't consider this a major advantage. As boaters, when our garment smells bad, all we need to do is rinse out the underarms. You're right about comfort - polyester is not not as rough and scratchy as polypro as a base layer. I experimented with nearly equal-weight Polypro, Capilene, and Polartec. The results were approximately as follows: Weight Weight after after dunking wringing Polypro 4x 2x Capilene 6x 4x Polartec 6x 3x Polypro is definitely the best thing to wear under a paddling jacket in conjunction with a wetsuit. Inside a breathable drysuit or drytop, my recommendation is Polartec PowerDry, an engineered polyester fabric. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Drysuit Fabrics, Goretex vs Whatever | General | |||
Source for Sunbrella | Cruising | |||
How thick to make the fairing? & vaccum bagging a hull | Boat Building |