LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #32   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 77
Default A question on thermostats

JimH wrote:
Reginald P. Smithers III wrote:
JimH wrote:
"jamesgangnc" wrote in message
ups.com...
Both the 140 and the 160 should work fine. As another poster pointed
out in raw water cooling the use of a 140 helps slow the effects of
salt water. I would install a 160 next time I had a reason to take it
out but I would not make a special exercise out of replacing it. If
you previously have had overheating issues your mechanic may have been
trying to mitigate other problems by running a lower temp thermostat.
The water leaving your engine and going into your manifolds and risers
should be cooler with the 140.

Thanks!

I did notice the temperature ran at 135 when at idle, at 140~145 at cruise
and at 160~165 at WOT, then back down immediately to a lower temperature
when at cruise or idle.

I plan to keep the 140 in the rest of the season.

Thanks again for your advice and comments. ;-)


That seems like a wide range of temperatures for a fresh water cooled
engine. Did you mention the wide range of temp. to your mechanic?

--
Reggie

That's my story and I am sticking to it!


Give it up Reggie. Then understand this message..........as I told you
before I would never consider any boating or mechanical advice you
offer. You have chosen to keep quiet about your boating background,
the boat you own, where you boat, amongst other things. For all I know
the only boat you own is the one you take a bath with.

Try opening up and folks might start listening to you. Until then,
please stop cluttering up this thread.


JimH,
I am not offering any advice, I made the observation that that seems
like a wide range of temp for a fresh water cooled engine, and thought
you might want to mention it to your mechanic. My boats temp never
ranged more than 10 degrees.

Really I am not cluttering up this thread, I am doing my best to try to
open this thread to discussion from other boaters and those with
mechanical skills way beyond yours and mine. If everyone keeps the
personal attacks out of threads we would have more boating discussions
and less name calling.

--
Reggie

That's my story and I am sticking to it!
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another strip-plank question - a bit long Pete Boat Building 3 January 12th 04 08:03 PM
Propeller efficiency question (electric) MBS Boat Building 4 December 23rd 03 04:39 AM
Other choice and counterpoise question Earl Haase Electronics 3 October 31st 03 06:43 PM
Exhaust question on inboard 1958 Chris Craft Gary Warner Boat Building 5 September 25th 03 12:32 AM
Sunday's VHF antics.....and a question.. Electronics 8 September 13th 03 09:04 AM


All times are GMT +1. The time now is 10:09 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017