What primer did you use?

Not all primers will work on aluminum. I have previously used this
http://www.westmarine.com/webapp/wcs.../10892/11204/4

and it is still there after several years.


"r_d" wrote in message
om...
Hi All,



I have an 86 OMC Cobra drive in my boat. Last year I wired brushed the
drive, painted it with primer and then with antifouling paint. At the end
of the season pulled the boat out of the water to find all of the paint
off the drive. I did prepare the drive according to manufacturers
directions. Is there a better paint for out drives then the primer and
then anti fouling drive paint scheme? I was hoping for epoxy paint that I
could use as the primer and then the normal out drive antifouling paint.
I do not really mind the cost as much as the bare aluminum in the salt
water. I am open to all suggestions.



Thanks

Mark.



p.s. I prepared the drive by wire brushing the crud off the drive then
washed with dishwashing soap. Let dry for 24 hrs then painted with
primer, dry for 24hrs then painted with the antifouling paint.