Home |
Search |
Today's Posts |
#1
posted to rec.boats
|
|||
|
|||
My Aluminum Fuel Tanks Need Replacing -HELP!
I bought a 1978 Chris Craft 410 Commander a year ago and have been
fixing everything on it. The last problem need is that the port fuel tank apparently had water in it for a long period of time which caused the aluminum fuel tank to corrode badly. It is old anyway at this point but I am told the aluminum has broken down and the interior aluminum decay is clogging up my fuel water seperator filter with tiny pieces of what looks like a granular oatmeal substance. Which means I have to constantly change out the filter to keep running. Right now I have gone to the fuel direction valve in the rear of the engine compartment and have both engines running off the starboard fuel tank....which has reduced the engine performance. My question is who still makes the original Chris Craft fuel tanks and how can I get a hold of them? My local marina in Northern Texas on Lake Texoma wants to farm the job out to a local welder but I prefer to buy the replacements that are made for the boat. The tanks are both located under the bed platform in the master suite in the rear of the boat. If I have to replace one I might as well replace both at this point. How big a job is it to remove and replace these tanks? Can I be so lucky to get advice from another Chris Craft boat owner who has already had this problem and got it done right? Please help me if you can. Richard McClure LocomOcean 1978 Chris Craft 410 Commander Motor Yacht |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Yacht water storage links -Mic | Cruising | |||
care of aluminum tanks | Boat Building | |||
(non-political) comments on fuel economy and technology | General | |||
Gas Hog Cars, same phenomenon as boats | General | |||
Older FRP gas tanks may be at risk with ethanol gas formulations | General |