Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
HLAviation
 
Posts: n/a
Default Cathodic Protection for Aluminum Hull - Need Help

Yeah I suspected this isnt an easy one ... do it wrong and the hull is
gone in no time

I contacted a manufacturer that makes these things for large vessels
.. lets see what they have to offer

Mayy


The things you're going to run into: Constant power availability and drain,
and the system costs more than the boat.


  #2   Report Post  
Matt Lang
 
Posts: n/a
Default Cathodic Protection for Aluminum Hull - Need Help

"HLAviation" wrote in message link.net...
Yeah I suspected this isnt an easy one ... do it wrong and the hull is
gone in no time

I contacted a manufacturer that makes these things for large vessels
.. lets see what they have to offer

Mayy


The things you're going to run into: Constant power availability and drain,
and the system costs more than the boat.


Actually the Mercathode is only about $120 .. it will doesnt use much
power and woiuld only have to run while the boat is in the water or if
it drains the battery while the motor is running
  #3   Report Post  
HLAviation
 
Posts: n/a
Default Cathodic Protection for Aluminum Hull - Need Help

I'm not real familiar with the system, however I was under the impression
that it was strictly for the drive.

"Matt Lang" wrote in message
om...
"HLAviation" wrote in message

link.net...
Yeah I suspected this isnt an easy one ... do it wrong and the hull is
gone in no time

I contacted a manufacturer that makes these things for large vessels
.. lets see what they have to offer

Mayy


The things you're going to run into: Constant power availability and

drain,
and the system costs more than the boat.


Actually the Mercathode is only about $120 .. it will doesnt use much
power and woiuld only have to run while the boat is in the water or if
it drains the battery while the motor is running



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hull Construction Shirley Tremblay General 1 July 15th 04 09:20 PM
Possible Cracks in Hull (fiberglass) Y General 4 May 26th 04 04:38 PM
Need help with hull repair Joe. R General 0 May 19th 04 02:26 AM
depth finder "Inside" alum hull Doug Kanter General 1 March 16th 04 07:13 AM
A couple of newbie questions Lou Dempster General 83 January 25th 04 08:42 PM


All times are GMT +1. The time now is 06:50 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017