On 4 Aug 2003 17:24:22 -0500, noah
wrote:

On Mon, 04 Aug 2003 14:09:08 GMT, "Terry Rago"
wrote:


I have an 89 carver with twin 3.7lx's Saturday I
lost one drive, pulled it yesterday and found that
the part on the back of the engine with the splines
that drives the shaft to the outdrive is smooth. Splines
are all gone. Can I change this without pulling that
engine? Does anyone know what that part is called?
The marina put a new gimbal bearing in about 4 weeks
ago and looking through the hole it does not appear to
be line up with the engine. Think this caused it??
Thanks for any help

Terry- go back to your dealer, with a very grim look on your face, and
talk to the service manager. Good luck.

noah

Courtesy of Lee Yeaton,
See the boats of rec.boats
www.TheBayGuide.com/rec.boats


Sorry- I should have said, go back to your marina service manager.

Courtesy of Lee Yeaton,
See the boats of rec.boats
www.TheBayGuide.com/rec.boats