Then prop is probably not the issue since you have a good one.
Either the engine is mounted slightly too high for hard turns or your trim
angle is wrong. You should trim down to make the turn. Thing about
lowering the engine mount is you will loose top end.
Which hole is the motor mounted w/. Remember - top hole means motor all the
way down and bottom hole means motor all the way up.

--
Tony
my boats at http://t.thomas.home.mchsi.com

"JGK" wrote in message
...

"Tony Thomas" wrote in message
newsgIwc.14515$Sw.7812@attbi_s51...
Make sure your trim is set right.
Also, I assume you have an aluminum prop. Get a good SS prop (a 4 blade
would be great on your application).

The prop I have is a Merc SS Laser II 20" pitch but it is a 3 blade.