LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Mikkilla
 
Posts: n/a
Default Blown head gasket or what...?


1.) have you checked the oil. if you have a blown head gasket you will end up
with water in the oil see if its milky in color on the dip stick.
2.) Your impeller might not be up to par to keep the engine cool. What was the
engine temp?
3.) was the water coming out at a study flow from the exhaust or was it all
steam and not water or very little?
4.) the water "spray" you got if a very good chance it came from the water that
got in to a uncovered Carb. Careful there you might have something rusted up in
the intake area.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Head Gasket on 50 HP 93 Evinrude dp General 2 November 4th 03 12:46 PM
head gasket failure, salt water in cylinders, question? Russell Hermansen General 3 September 30th 03 04:35 AM
Nannidiesel 2.50 - 14 HP : used 88 hrs then cylinder head gasket failure : continued Jean-Pierre Trolet General 0 August 20th 03 07:59 PM
Jabsco Head - help! Lloyd Sumpter General 11 August 14th 03 05:08 AM
Nannidiesel 2.50 - 14HP : used 88 hrs then cylinder head gasket failure ! Jean-Pierre Trolet General 0 July 30th 03 09:32 PM


All times are GMT +1. The time now is 06:07 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017