My friend u are a gentleman, many thanks
Will give it a go a bit later tonight

Regards

Alan

"Meindert Sprang" wrote in message
...
"Grumpy" wrote in message
...
No problem with that but the Furuno has TD-A, TD-B, RX-A, RX-B, do I
just
use 1 set ie. A or B?

Furuno --- Magellan
TD-A ----- RX
Ground ----- Ground
RX-A ----- TX
RX-B ----- Ground

TD-B is left unconnected.

Meindert

"Grumpy" wrote in message
u...

My friend u are a gentleman, many thanks
Will give it a go a bit later tonight

Do let us know if it did work out ok :-)

Meindert

and if it doesn't, call Magellan.
I tried using Furuno's web site info and it didn't work. I went to Garmin
and found exactly what I needed. I think all three companies are very
helpful and take good care of their customers.

"Meindert Sprang" wrote in message
...
"Grumpy" wrote in message
u...

My friend u are a gentleman, many thanks
Will give it a go a bit later tonight

Do let us know if it did work out ok :-)

Meindert

"William G. Andersen" wrote in message
news:_%j8c.2805$Rh.1202@fed1read05...
and if it doesn't, call Magellan.
I tried using Furuno's web site info and it didn't work. I went to Garmin
and found exactly what I needed. I think all three companies are very
helpful and take good care of their customers.

And you can also take a look at www.shipmodul.com/en/connections.html
This page describes all sort of combinations with single-ended (signal vs.
ground) and differential (+/-, A and B) connections. And wherever you read
'multiplexer' you can fill in any NMEA capable device.

Meindert