Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Mon, 20 Dec 2004 00:30:28 GMT, "Falky foo"
wrote: Hi, I've been fiddling around with one of my seacocks. I've never fiddled with them before. It's the one that the sink drains through. Anyhow it's old and could use replacing, but I can't really afford that. So I went to replace the plastic tube that the sink drains down through into the seacock through the hull because it was old and nasty, and when I took the tube off the seacock water stared gushing up through it. I put the tube back on and the water filled the tube about 4-5 inches and then it stopped. So it seems that 4-5 inches of water is nessary to keep the through-hull from letting water in. Is this normal? Because if so it means that the little metal bands holding the drain tubes on to the seacocks are the only thing preventing the boat from sinking, and that seems a little scary. Thoughts? Hmmmm..... I'm having some trouble understanding what happened here. There isn't a flapper, ball or mechanical valve that would prevent water from entering the hull if the drain tube becomes disconnected? Seems a little odd. Would I be concerned? Yes. Check to see that the thru-hull doesn't have a manual shut-off. If it dosen't, haul it and have one installed. Later, Tom |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Through hulls and seacocks | Cruising | |||
Sea Cocks | Cruising | |||
Through-hulls and Seacocks | Boat Building | |||
Marelon seacocks | Cruising |