Have your prop checked. It sounds like it is slipping on the hub. This is
common especially after hitting something or getting something wrapped
around the prop.

--
Bill
Chesapeake, Va


"Richard Malcolm" wrote in message
om...
a month ago I lost foward gera. had some "cone" in the lower end
worked on by my mechanic and all was fine
now I have foward only at a really slow spped. when I give it more gas
it just revs. sometimes it catches foward at this high idle with a
thump. reverse seems to work fine
I think that it is either
1 related to what the mechanic did earlier
2 a cable adjustment issue
3 trannie fluid issue
4 some weird prop issue

any ideas why I would lose foward except at really slow speeds, while
reverse seems fine?

"IBNFSHN" wrote in message news:U6aSc.26603$Jo1.23049@lakeread01...
Have your prop checked. It sounds like it is slipping on the hub. This is
common especially after hitting something or getting something wrapped
around the prop.

--

thanks
I did take the prop off tonight and looked at it. It seemed OK to me,
nothing look all that different than I thought it would. What should I
be looking for?

Take a permanent marker (Sharpie if you can stand T.O.). Mark the prop and
the hub and run see of the lines still match up.
Bill

"Richard Malcolm" wrote in message
om...
"IBNFSHN" wrote in message
news:U6aSc.26603$Jo1.23049@lakeread01...
Have your prop checked. It sounds like it is slipping on the hub. This
is
common especially after hitting something or getting something wrapped
around the prop.

--

thanks
I did take the prop off tonight and looked at it. It seemed OK to me,
nothing look all that different than I thought it would. What should I
be looking for?

"IBNFSHN" wrote in message news:U6aSc.26603$Jo1.23049@lakeread01...
Have your prop checked. It sounds like it is slipping on the hub. This is
common especially after hitting something or getting something wrapped
around the prop.

--

thanks
I did take the prop off tonight and looked at it. It seemed OK to me,
nothing look all that different than I thought it would. What should I
be looking for?

You won't be able to see anything, either take it to a prop shop and have
them check it or try Calif Bill's suggestion.

--
Bill
Chesapeake, Va


"Richard Malcolm" wrote in message
m...
"IBNFSHN" wrote in message
news:U6aSc.26603$Jo1.23049@lakeread01...
Have your prop checked. It sounds like it is slipping on the hub. This
is
common especially after hitting something or getting something wrapped
around the prop.

--

thanks
I did take the prop off tonight and looked at it. It seemed OK to me,
nothing look all that different than I thought it would. What should I
be looking for?

I concur with the others, it's probably a spun prop hub, but will go one
better. If you don't have a spare prop, buy one (you should have a spare
anyway), and put it on. Problem go away? Then it was a spun prop.









In article KkpSc.26899$Jo1.14758@lakeread01, "IBNFSHN" wrote:

You won't be able to see anything, either take it to a prop shop and have
them check it or try Calif Bill's suggestion.

--
Bill
Chesapeake, Va


"Richard Malcolm" wrote in message
m...
"IBNFSHN" wrote in message
news:U6aSc.26603$Jo1.23049@lakeread01...
Have your prop checked. It sounds like it is slipping on the hub. This
is
common especially after hitting something or getting something wrapped
around the prop.

--

thanks
I did take the prop off tonight and looked at it. It seemed OK to me,
nothing look all that different than I thought it would. What should I
be looking for?