On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.

On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.


"It's always funny when a bankster makes ad hominem remarks."

It's even funnier when the hominem in question responds with more bull**** to show his 'manliness'.

On Sat, 27 Oct 2018 18:59:25 -0400, John H.
wrote:

On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.


"It's always funny when a bankster makes ad hominem remarks."

It's even funnier when the hominem in question responds with more bull**** to show his 'manliness'.

===

Especially when we all know that the hominem in question is nothing
but a pussy at heart.

Wrote in message:
On Sat, 27 Oct 2018 18:59:25 -0400, John H. wrote:On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:On 10/27/18 3:19 PM, wrote: On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze wrote: On 10/24/18 2:35 PM, wrote: On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze wrote: Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower. === If you really want to challenge yourself and impress your gunsmith friend, build it with an 80% lower. I don't have the particular skills, drill press and other tools needed to finish an 80% lower. Besides, the gunsmith buddy is already impressed with me, because I tutored his kid for three months for free and helped the kid go from the equivalent of a C- in English to a solid B and to raise his score more than 100 points on the SAT Reading Test and Writing and Language Test. I also helped him start to lose his southern redneck speaking patois and use more standard English. Hopefully, he will continue developing his skills and put them to good use in college. === If you want to engage in manly pursuits with manly weapons, you should first acquire some manly tools and skills. --- This email has been checked for viruses by AVG. http://www.avg.com My "manly skills" are sufficient for the task I've described. I have no need for a jig or drill press to build an 80% lower, and I don't want to waste a couple of weeks spraying, heating and curing a durable finish on the aluminum parts. My goal was to teach myself the innards of a nice rifle and then shoot it. I'll take your advice for what I think it is worth, which is, of course, nothing."It's always funny when a bankster makes ad hominem remarks."It's even funnier when the hominem in question responds with more bull**** to show his 'manliness'.===Especially when we all know that the hominem in question is nothingbut a pussy at heart.

Are we talking about Fat Harry? He has asserted that he is manly
enough to tinker with guns. The fact is there are many girls and
women that can out shoot him, and field strip guns, any day of
the week under any circumstances, including combat.

You're right. Fat Harry is a pussy, heart and soul.
--
x

On 10/28/18 9:20 AM, justan wrote:

You're right. Fat Harry is a pussy, heart and soul.



There are *many* women (and men) who can outshoot me. But that seems to
be an issue with you right-wing trashmeisters, not me.
On the other hand, or even offhand, JustanAsshole, I'm certain I can
outshoot you with generally available rifles or handguns, and at
whatever distance you choose. With the .308 rifle I just sold, I was
shooting under 2" groups at 100 yards off a bipod. With the .308 rifle I
am now assembling, I hope to bring that down, with practice, to under 1"
groups at 100 yards off a bipod. I should have the new lower assembled
by the middle of week. I'll post some photos to give you a woodie you
probably haven't seen for a decade.

BTW, do you think you can learn to post without the dozens of and
suchlike crap that accompanies the diarrhea you present us here?

On 10/27/18 10:43 PM, wrote:
On Sat, 27 Oct 2018 18:59:25 -0400, John H.
wrote:

On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.


"It's always funny when a bankster makes ad hominem remarks."

It's even funnier when the hominem in question responds with more bull**** to show his 'manliness'.

===

Especially when we all know that the hominem in question is nothing
but a pussy at heart.



I'm not sure a bankster's "research" to redline a neighborhood
qualifies as toughness...it's more like racism. Isn't that what you
did, W'hiner?

Keyser Soze Wrote in message:
On 10/28/18 9:20 AM, justan wrote: You're right. Fat Harry is a pussy, heart and soul. There are *many* women (and men) who can outshoot me. But that seems to be an issue with you right-wing trashmeisters, not me.On the other hand, or even offhand, JustanAsshole, I'm certain I can outshoot you with generally available rifles or handguns, and at whatever distance you choose. With the .308 rifle I just sold, I was shooting under 2" groups at 100 yards off a bipod. With the .308 rifle I am now assembling, I hope to bring that down, with practice, to under 1" groups at 100 yards off a bipod. I should have the new lower assembled by the middle of week. I'll post some photos to give you a woodie you probably haven't seen for a decade.BTW, do you think you can learn to post without the dozens of and suchlike crap that accompanies the diarrhea you present us here?

Oooo! You are so manly.
I have no idea as to why you continue ro try to impress me and others.
You are certain of many things that are wrong and pure bull****.
You don't know if I can shoot, or even if l own a gun.
In fact you don't seem to know much of anything that really matters.
--
x

On 10/28/18 10:13 AM, justan wrote:
Keyser Soze Wrote in message:
On 10/28/18 9:20 AM, justan wrote: You're right. Fat Harry is a pussy, heart and soul. There are *many* women (and men) who can outshoot me. But that seems to be an issue with you right-wing trashmeisters, not me.On the other hand, or even offhand, JustanAsshole, I'm certain I can outshoot you with generally available rifles or handguns, and at whatever distance you choose. With the .308 rifle I just sold, I was shooting under 2" groups at 100 yards off a bipod. With the .308 rifle I am now assembling, I hope to bring that down, with practice, to under 1" groups at 100 yards off a bipod. I should have the new lower assembled by the middle of week. I'll post some photos to give you a woodie you probably haven't seen for a decade.BTW, do you think you can learn to post without the dozens of and suchlike crap that accompanies the diarrhea you present us here?

Oooo! You are so manly.
I have no idea as to why you continue ro try to impress me and others.
You are certain of many things that are wrong and pure bull****.
You don't know if I can shoot, or even if l own a gun.
In fact you don't seem to know much of anything that really matters.


There's really nothing about you worth knowing.

Keyser Soze Wrote in message:
On 10/28/18 10:13 AM, justan wrote: Keyser Soze Wrote in message: On 10/28/18 9:20 AM, justan wrote: You're right. Fat Harry is a pussy, heart and soul. There are *many* women (and men) who can outshoot me. But that seems to be an issue with you right-wing trashmeisters, not me.On the other hand, or even offhand, JustanAsshole, I'm certain I can outshoot you with generally available rifles or handguns, and at whatever distance you choose. With the .308 rifle I just sold, I was shooting under 2" groups at 100 yards off a bipod. With the .308 rifle I am now assembling, I hope to bring that down, with practice, to under 1" groups at 100 yards off a bipod. I should have the new lower assembled by the middle of week. I'll post some photos to give you a woodie you probably haven't seen for a decade.BTW, do you think you can learn to post without the dozens of and suchlike crap that accompanies the diarrhea you present us here? Oooo! You are so manly. I have no idea as to why you continue ro try to impress me and others. You are certain of many things that are wrong and pure bull****. You don't know if I can shoot, or even if l own a gun. In fact you don't seem to know much of anything that really matters. There's really nothing about you worth knowing.

Oh by the way, that thing is your problem. Go see your
Apple expert.
--
x