Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.

Keyser Soze Wrote in message:
Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower.

Yawn. I'd rather watch grass grow.
--
x


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

On 10/24/18 1:48 PM, justan wrote:
Keyser Soze Wrote in message:
Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower.

Yawn. I'd rather watch grass grow.


Well, that's about the level of your competence...watching grass
grow...and you probably need someone to explain it to you.

Keyser Soze
On 10/24/18 1:48 PM, justan wrote:
Keyser Soze Wrote in message:
Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower.

Yawn. I'd rather watch grass grow.


"Well, that's about the level of your competence...watching grass
grow...and you probably need someone to explain it to you."

SNERK!
I wholeheartedly and unequivocally agree with this post!

True North Wrote in message:
Keyser SozeOn 10/24/18 1:48 PM, justan wrote: Keyser Soze Wrote in message: Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower. Yawn. I'd rather watch grass grow. "Well, that's about the level of your competence...watching grass grow...and you probably need someone to explain it to you."SNERK!I wholeheartedly and unequivocally agree with this post!

It would take a moron to fully appreciate the ranting and ravings
of the fat fool of Rosedale Lane.
--
x


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

justan wrote:
True North Wrote in message:
Keyser SozeOn 10/24/18 1:48 PM, justan wrote: Keyser Soze Wrote in message: Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower. Yawn. I'd rather watch grass grow. "Well, that's about the level of your competence...watching grass grow...and you probably need someone to explain it to you."SNERK!I wholeheartedly and unequivocally agree with this post!
It would take a moron to fully appreciate the ranting and ravings
of the fat fool of Rosedale Lane.

And there you have it...

True North wrote:
Keyser Soze
On 10/24/18 1:48 PM, justan wrote:
Keyser Soze Wrote in message:
Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower.
Yawn. I'd rather watch grass grow.

"Well, that's about the level of your competence...watching grass
grow...and you probably need someone to explain it to you."

SNERK!
I wholeheartedly and unequivocally agree with this post!

Of course you do. You have no idea what your only friend Fat Harry is
typing about but you, of course, agree with his lame rebuttal to an
honest response.

On Wed, 24 Oct 2018 20:18:26 -0400, Alex wrote:

True North wrote:
Keyser Soze
On 10/24/18 1:48 PM, justan wrote:
Keyser Soze Wrote in message:
Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower.
Yawn. I'd rather watch grass grow.

"Well, that's about the level of your competence...watching grass
grow...and you probably need someone to explain it to you."

SNERK!
I wholeheartedly and unequivocally agree with this post!

Of course you do. You have no idea what your only friend Fat Harry is
typing about but you, of course, agree with his lame rebuttal to an
honest response.


SNERK!
I wholeheartedly and unequivocally agree with this post!

On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.

---
This email has been checked for viruses by AVG.
http://www.avg.com

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.