Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Jim Irvine wrote:
If no pump out is available, one could disconnect the hoses and hand dump the pottie, but this has never been needed in my case. I think you'd find that harder to do than you think. The pumpout hose comes out of the tank at the bottom, so you can't disconnect it from the tank without dumping it...you'd have to disconnect the hose from the deck pumpout fitting...and then be VERY careful to keep it above the top of the tank while you carry it off the boat to dump it. On my Sealand unit, the pumpout connection fitting is on the top of the tank, and there is an internal tube from there going to the bottom. You can disconnect the hoses, and put on the supplied cap without spilling anything. BB Yes, mine is configured the same way and it is relatively simple to hand dump if necessary. -Jim |
#2
![]() |
|||
|
|||
![]()
That's good to know, 'cuz that's a somewhat recent change. Thanks for
the heads up. (Obviously, I need to update my catalogs). However, not all of 'em are designed that way. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://www.seaworthy.com/html/get_ri...oat_odors.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Can a single 72 gal per hour fuel pump run two 392 cu inch motors? | General | |||
Elec Question Water Pump & DC | General | |||
Jabsco Head - help! | General | |||
Priming areator pump | General | |||
Need to pump shit? | General |