Alert! Alert!...boating post
 

Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.

Alert! Alert!...boating post
 

On 10/6/17 11:06 AM, True North wrote:
Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.


Consider getting a stainless prop to replace the one you broke, and have
that one fixed to keep as a spare.

Alert! Alert!...boating post
 

On Fri, 6 Oct 2017 08:06:55 -0700 (PDT), True North wrote:

Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.

For sure it was Crosby's fault.

Alert! Alert!...boating post
 

On Fri, 6 Oct 2017 11:13:51 -0400, Keyser Soze wrote:

On 10/6/17 11:06 AM, True North wrote:
Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.


Consider getting a stainless prop to replace the one you broke, and have
that one fixed to keep as a spare.

What he said ;-)
Stainless will stand up better to small dings but a big rock will
still kill one, along with bending the prop shaft if you hit hard
enough.
Some people will say, stay with the aluminum one and consider it
expendable. If you feel that way, get a plastic one with replaceable
blades. I keep one of them on the boat as a spare. Just be aware, you
usually need to bump the pitch up a size or two because they flex
under load. I run a stainless 11" but in plastic I needed the 13"
blades to get the RPM right at WOT.

Alert! Alert!...boating post
 

On 10/6/2017 12:49 PM, wrote:
On Fri, 6 Oct 2017 11:13:51 -0400, Keyser Soze wrote:

On 10/6/17 11:06 AM, True North wrote:
Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and gotbit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.


Consider getting a stainless prop to replace the one you broke, and have
that one fixed to keep as a spare.

What he said ;-)
Stainless will stand up better to small dings but a big rock will
still kill one, along with bending the prop shaft if you hit hard
enough.
Some people will say, stay with the aluminum one and consider it
expendable. If you feel that way, get a plastic one with replaceable
blades. I keep one of them on the boat as a spare. Just be aware, you
usually need to bump the pitch up a size or two because they flex
under load. I run a stainless 11" but in plastic I needed the 13"
blades to get the RPM right at WOT.



If I ever had an I/O again (which I won't) and if I regularly went
boating in shallow, rocky areas, I think I'd stick to the aluminum
prop. Stainless is certainly better overall but the aluminum will
likely snap before something more serious in the drive train does.
Those rubber hubs that are supposed to give (resulting in a spun hub)
still means you have to get it fixed.

Alert! Alert!...boating post
 

On Fri, 6 Oct 2017 08:06:55 -0700 (PDT), True North
wrote:

Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.


===

Aluminum props are usually repairable, small matter of money of
course.

If you have an Android or Apple cell phone you might want to look
into an app called Navionics (US and Canada). It turns your phone
into a fairly robust GPS chart plotter and will give you some advance
warning of those jumping rocks. It's much cheaper than prop repair.
Everyone here except your narcissistic buddy has hit a rock at one
time or another.

---
This email has been checked for viruses by AVG.
http://www.avg.com

Alert! Alert!...boating post
 

On 10/6/17 6:44 PM, wrote:
On Fri, 6 Oct 2017 08:06:55 -0700 (PDT), True North
wrote:

Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.


===

Aluminum props are usually repairable, small matter of money of
course.

If you have an Android or Apple cell phone you might want to look
into an app called Navionics (US and Canada). It turns your phone
into a fairly robust GPS chart plotter and will give you some advance
warning of those jumping rocks. It's much cheaper than prop repair.
Everyone here except your narcissistic buddy has hit a rock at one
time or another.

---
This email has been checked for viruses by AVG.
http://www.avg.com


If you are referring to me, I'm sure I hit every submerged rock between
Milford and Branford in Long Island Sound.

Alert! Alert!...boating post
 

True North wrote:
Hate to interrupt all the 'Americans Acting badly With Guns' posts, but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit nosy checking out Sidney Crosby's house and his waterfront access. I was motoring slowly along when I saw the depth gauge suddenly go from 5-6 feet to just less than 3 feet. Heard the bang right away so I quickly tilted up the motor and shifted it to neutral. With the swim platform covering the I/O Alpha Drive it was hard to see if I had any damage and as I floated back into deeper water I moved into forward and didn't notice anything unusual so I continued my 2 hour tour of the lake. Only after retrieving the boat did I see a chunk missing out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly coloured floating balls stretched along where I went about 40-50 feet offshore. Now I know why they were there. I should send a letter to Crosby complaining that he should have left the 'barrier' out at least until Thanksgiving this Monday.


Ever heard of a chart? I/O's are lake boats.

Alert! Alert!...boating post
 

Keyser Soze wrote:
On 10/6/17 11:06 AM, True North wrote:
Hate to interrupt all the 'Americans Acting badly With Guns' posts,
but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit
nosy checking out Sidney Crosby's house and his waterfront access. I
was motoring slowly along when I saw the depth gauge suddenly go from
5-6 feet to just less than 3 feet. Heard the bang right away so I
quickly tilted up the motor and shifted it to neutral. With the swim
platform covering the I/O Alpha Drive it was hard to see if I had any
damage and as I floated back into deeper water I moved into forward
and didn't notice anything unusual so I continued my 2 hour tour of
the lake. Only after retrieving the boat did I see a chunk missing
out of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly
coloured floating balls stretched along where I went about 40-50 feet
offshore. Now I know why they were there. I should send a letter to
Crosby complaining that he should have left the 'barrier' out at
least until Thanksgiving this Monday.


Consider getting a stainless prop to replace the one you broke, and
have that one fixed to keep as a spare.

Good advice! Spend a lot of money on a performance prop for a Bayliner
that will trash your driveshaft instead of denting the next time you hit
something.

Alert! Alert!...boating post
 

On 10/6/17 8:11 PM, Alex wrote:
True North wrote:
Hate to interrupt all the 'Americans Acting badly With Guns' posts,
but I had a small bit of misfortune yesterday.
I was up boating with my Springer Spaniel on Grand Lake and got a bit
nosy checking out Sidney Crosby's house and his waterfront access.Â* I
was motoring slowly along when I saw the depth gauge suddenly go from
5-6 feet to just less than 3 feet. Heard the bang right away so I
quickly tilted up the motor and shifted it to neutral.Â* With the swim
platform covering the I/O Alpha Drive it was hard to see if I had any
damage and as I floated back into deeper water I moved into forward
and didn't notice anything unusual so I continued my 2 hour tour of
the lake. Only after retrieving the boat did I see a chunk missing out
of one of my aluminum propeller blades.
D'oh...don't know if that can be repaired or if I have to buy a new one.

I remembered that during the summer, there was a string of brightly
coloured floating balls stretched along where I went about 40-50 feet
offshore.Â* Now I know why they were there.Â* I should send a letter to
Crosby complaining that he should have left the 'barrier' out at least
until Thanksgiving this Monday.


Ever heard of a chart?Â* I/O's are lake boats.

I'm not an I/O fan, but your claim about "lake boats" is just another
example of your ignorance.