Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
Ya - sounds like mine with a 15 - I run a 17 but use a 15 when I need a big
hole shot. -W "Bob La Londe" wrote in message ... "Clams Canino" wrote in message t... If you make 6000 - you might be a little underpropped - unless your hole shot is important to you. Probably. Its also a 5 blade prop. It literally comes out of the water instantly if I trim down. Even trimmed up with the jack plate all the way up it comes out of the hole just fine. My inline pulls good to 6000 - but I cruise it at 4200 - and run any "sustained" WOT at 5500 max. I did do about 3 minutes at 6000 recently.... a bunch of kids in some new IO hotboat tried to run me. They finally pulled ahead - but *very* slowly. I wouln't have done it except that I could see that with 5 "kewl dewds" in the boat - they had too much weight. Next time they see an old inline - they'll remember me. I did a little of that a few weeks ago running solo up river. Some guy with a hug cat/tunnel went by me and sprayed me with his twin rooster tails. I opened it up and he started porpoising really bad when he hit the throttle. I shot by him like he was sitting still. -- Bob La Londe Yuma, Az http://www.YumaBassMan.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Transom Height - Dumb Question Alert | General | |||
Mercury 200 Classic problem ! | General | |||
Still Trouble Shooting 1982 Mercury V-6 | General | |||
What should I sell this engine for?? 66' 50hp Mercury | General |