LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
noah
 
Posts: n/a
Default fishfinder problems

On Wed, 17 Sep 2003 20:05:56 GMT, (alex) wrote:


For some years now I have a Zercom 165 fishfinder. At the time I
bought this particular unit because it was supposed to have a good
performance at high speeds. With the unit came a transom mount
transducer. So far I had poor results with it. It performs very wel at
low speeds but as soon as a come on a plane the reading gets flaky and
at a a speed of 25 knots or more I get no readout at all. I already
tried relocating the transducer, trying to find a spot with less
turbulence, but with little or no improvement.

Now I'm considering moving it to the inside of the boat. I suppose I
could mount it in the bildge, fixing it with some epoxy or sillicone.
Is there anyone out there who had similar experience or who could give
me some pointers in order to solve this problem ?

Many thanks in advance

Alex


Hi Alex.

As Doug pointed out, placement is critical for both "stern mounted"
and "through the hull" transducers. Any turbulence or "bubbles" in
the water flow around the transducer will cause problems. Usually, a
transom mount is placed near the first "hull step", away from the
prop. It should also be mounted roughly "even" with the hull
(depth-wise") to 1/2" below.

If you look up (google) fish-finders, you should find some good pages
( I did it not too long ago, but didn't keep the url's).

There are various ways to mount the transducer inside (through the
hull), but *don't* use silicone. It will kill the signal. Epoxy (for
fiberglass) and "water boxes" for aluminum, are preferred.

Good luck,
noah
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fishfinder Opinions? M.E. General 3 August 24th 03 12:21 AM
Mercruiser 120 engine problems noah General 2 August 12th 03 05:07 AM
I'm on a well so I don't have the chlorine to help, frank mitch newton I have similar problems with it building up fmn2 General 0 August 9th 03 07:21 PM
Motor Problems (Please help) Rural Knight General 0 August 7th 03 01:47 AM
Best Fishfinder JohnH General 1 July 17th 03 04:27 AM


All times are GMT +1. The time now is 01:42 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017