On Wed, 23 Dec 2009 09:26:46 -0800, "Bill McKee"
wrote:


"Loogypicker" wrote in message
...
On Dec 22, 6:03 pm, "Bill McKee" wrote:
"nom=de=plume" wrote in message

...





"John H" wrote in message
...
Thanks to all for the suggestions, especially Harry and the plum (try
a sewing machine!).

Comments appreciated. I found a shop that'll do the job. Now I'll let
it dry out a bit and take it in.

Again, thanks

I guess you don't know how to use one. You should learn.

--
Nom=de=Plume

I can see you have never tried to sew the middle of a large canvas cover
on
a home sewing machine.- Hide quoted text -

- Show quoted text -

I have. When I built my hovercraft, I sewed all of the skirt myself. Most
home machines do not have enough clearance to get a large heavy cover ripped
in the middle in to the machine. Edges are fine, but not the center. My
wife has a Bernina machine about 30 years old. Lots of power and will sew
even naugahyde for the engine pad, but I had a rip in a cover a few years
ago, and could not get the cover in enough to sew it.


Mr. Kim, at an auto upholstery/boat cover shop will repair the large
hole and a couple smaller ones for $45. Can't beat that with a stick.

Harry had mentioned a hundred dollar shrink wrap guy. I'd love the
phone number of that guy. The cheapest I've been able to find around
here is $13.50/ft, measured from the tip to the bow to the back of the
engine.
--

Have a Super Christmas and a Spectacular New Year!

John H

Gene wrote:
On Wed, 23 Dec 2009 14:13:47 -0500, John H
wrote:

The cheapest I've been able to find around
here is $13.50/ft, measured from the tip to the bow to the back of the
engine.

The materials (alone) are quite cheap.....
http://www.boatshrink.com/

How much is the heat gun?

Gene wrote:
On Wed, 23 Dec 2009 14:26:50 -0500, Jim wrote:

Gene wrote:
On Wed, 23 Dec 2009 14:13:47 -0500, John H
wrote:

The cheapest I've been able to find around
here is $13.50/ft, measured from the tip to the bow to the back of the
engine.
The materials (alone) are quite cheap.....
http://www.boatshrink.com/
How much is the heat gun?

IIRC, it was about $300, though I've seen them priced at twice that
much. I think a do-it-yourselfer could get by spending a LOT less....
Yup. I thought they were kind of pricy. Also, I shudder to think what a
flame gun could do to a fiberglass boat in the hands of klutz. Harry for
instance.

On 12/23/09 4:20 PM, Gene wrote:
On Wed, 23 Dec 2009 16:09:27 -0500, wrote:

Gene wrote:
On Wed, 23 Dec 2009 14:26:50 -0500, wrote:

Gene wrote:
On Wed, 23 Dec 2009 14:13:47 -0500, John
wrote:

The cheapest I've been able to find around
here is $13.50/ft, measured from the tip to the bow to the back of the
engine.
The materials (alone) are quite cheap.....
http://www.boatshrink.com/
How much is the heat gun?

IIRC, it was about $300, though I've seen them priced at twice that
much. I think a do-it-yourselfer could get by spending a LOT less....
Yup. I thought they were kind of pricy. Also, I shudder to think what a
flame gun could do to a fiberglass boat in the hands of klutz. Harry for
instance.

I believe my tool of choice would be an iron. That is the only
accepted practice for fabric covering of aircraft where heat is used
for taughtening the fabric....


The guy who does mine comes to your house or boatyard, whatever, and
this year he raised his price from $7.50 to $8.00 a foot. He does a
great job, even better than the dealer I used to use. Most of the
boatyards/dealers charge $13 to $15 a foot.

I see flajim has made another of his idiotic, uninformed posts. He
should stick to spoofing the ID's of other posters here.

"Gene" wrote in message
...
On Wed, 23 Dec 2009 16:09:27 -0500, Jim wrote:

Gene wrote:
On Wed, 23 Dec 2009 14:26:50 -0500, Jim wrote:

Gene wrote:
On Wed, 23 Dec 2009 14:13:47 -0500, John H
wrote:

The cheapest I've been able to find around
here is $13.50/ft, measured from the tip to the bow to the back of
the
engine.
The materials (alone) are quite cheap.....
http://www.boatshrink.com/
How much is the heat gun?

IIRC, it was about $300, though I've seen them priced at twice that
much. I think a do-it-yourselfer could get by spending a LOT less....
Yup. I thought they were kind of pricy. Also, I shudder to think what a
flame gun could do to a fiberglass boat in the hands of klutz. Harry for
instance.

I believe my tool of choice would be an iron. That is the only
accepted practice for fabric covering of aircraft where heat is used
for taughtening the fabric....
--
It is usually futile to try to talk facts and analysis to people who are
enjoying a sense of moral superiority in their ignorance.
-Thomas Sowell

Grady-White Gulfstream, out of Oak Island, NC.

Homepage
http://pamandgene.tranquilrefuge.net/boating/the_boat/my_boat.htm

Forté Agent 6.00 Build 1186\

An iron may stick to the plastic. I have a Black and Decker heat gun from
the 1980's. Blows lot of heat. Here is a dual temp gun $32.
http://www.amazon.com/Black-Decker-9.../dp/B0000302U8

On Wed, 23 Dec 2009 14:43:30 -0500, Gene
wrote:

On Wed, 23 Dec 2009 14:26:50 -0500, Jim wrote:

Gene wrote:
On Wed, 23 Dec 2009 14:13:47 -0500, John H
wrote:

The cheapest I've been able to find around
here is $13.50/ft, measured from the tip to the bow to the back of the
engine.

The materials (alone) are quite cheap.....
http://www.boatshrink.com/

How much is the heat gun?

IIRC, it was about $300, though I've seen them priced at twice that
much. I think a do-it-yourselfer could get by spending a LOT less....

Well, I notice Harry hasn't posted anything about his hundred dollar
guy. Must've been more BS.

I don't think I want to try the shrink wrap trick myself. We don't
normally get a snow like we had - the last time was 1996 - so I don't
think I'll invest in the shrink wrap stuff.
--

Have a Super Christmas and a Spectacular New Year!

John H