LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
posted to rec.boats.electronics
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 100
Default Xantrex Link 20

Gerald,
1) Not resetting to zero ... sounds to me like either the charger's
ground lead is connected direct to the batteries bypassing the shunt,
or a ground lead is running from the starter battery ground to the
starter or engine block. The ground legs of your battery must have
absolutly nothing connected to them except for the shunt. No
exceptions. It's hard to not have an exception. Heavy wires from
chargers, inverters, etc. may be inconvient to route to the shunt, and
misc. devices that are connected direct to the battery as part of the
boats wiring harness, like your bilge pump, need to have their ground
wire rerouted to the shunt.

2) Dead except for green bars ... I had the same problem last month,
disconnecting and reconnecting the link 20 power lead at the battery
cleared the problem for me.

Dan (b393capt)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Balmar ARS-4 or Xantrex XAR regulators? Glenn Ashmore Electronics 1 February 15th 06 07:59 PM
400 Watt Xantrex Inverter at Costco for $29 Wayne.B General 7 April 3rd 05 05:59 AM
Noisy Xantrex Battery Charger Ron Electronics 3 May 18th 04 06:00 PM
New Xantrex MX2000 inverter ?? bob Electronics 0 October 29th 03 11:53 PM
Noisy Xantrex inverter Truelove39 Cruising 4 October 10th 03 11:59 PM


All times are GMT +1. The time now is 11:26 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017