Xantrex Link 20
			 
			 
			
		
		
		
			
			On Nov 30, 11:25*pm, b393capt  wrote: 
 Gerald, 
 1) Not resetting to zero ... sounds to me like either the charger's 
 ground lead is connected direct to the batteries bypassing the shunt, 
 or a ground lead is running from the starter battery ground to the 
 starter or engine block. The ground legs of your battery must have 
 absolutly nothing connected to them except for the shunt. No 
 exceptions. It's hard to not have an exception. Heavy wires from 
 chargers, inverters, etc. may be inconvient to route to the shunt, and 
 misc. devices that are connected direct to the battery as part of the 
 boats wiring harness, like your bilge pump, need to have their ground 
 wire rerouted to the shunt. 
 
 2) Dead except for green bars ... I had the same problem last month, 
 disconnecting and reconnecting the link 20 power lead at the battery 
 cleared the problem for me. 
 
 Dan (b393capt) 
 
If that does not work, also disconnected the Link 20 battery voltage 
sense leads at the same time. 
 
		 
		
		
		
		
		
		
		
		
	
	 |