LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15   Report Post  
posted to rec.boats.electronics
external usenet poster
 
First recorded activity by BoatBanter: Jul 2007
Posts: 38
Default 12 volt stabalizer?

look at:http://www.logicsupply.com/products/m2_atx
I use them to run my cpu, monitor and TV.


Hanz


wrote:
On Wed, 02 Jul 2008 23:31:17 +0000, Larry wrote:


wrote in news

Not true. I have a spare depth sounder (a cheap Humminbird fish
finder) that goes berserk at anything over about 15 volts. Keeping the
input voltage to all those other, more expensive instruments
controlled at 12 volts lets them run at lower temps, which in
electronics, equals longer life and greater reliability.



It is impossible to put 15 VDC across a normally-charging, functional on
all cells, lead acid 6-cell battery.

If there is 15V on that battery you are WAY overcharging it or have
corroded battery terminals causing series resistance the charging current
is flowing through. This is not a problem bacause a NORMAL alternator with
a working regulator will simply cut the current back, as it folds over the
voltage at its 14.2VDC setting.

Your fishfinder is going berserk because the regulator has lost control of
your alternator's charging and is charging a battery with high internal
resistance caused by a dead cell, probably, to create pulsating DC across
the bad battery....that whining sound in your car stereo is caused by it.
Now with several volts peak of pulsating DC riding on top of the battery
voltage, the pulses are causing havoc in the sonar's digital circuits.
They expect it to be running on SMOOTH DC....



See, you really don't know as much as you think. You said any marine electronic
device can run on 10-18 volts, which is simply WRONG. My charging source is the
alternator built into a 9.9 hp outboard. Regulation is more or less
non-existent. When voltage gets up around 15 volts, I turn on some cabin lights
to bring it back down.









 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Best Way to Provide 24-volt for a 24-volt Trolling Motor? [email protected] General 8 November 16th 05 03:18 AM
12 - Volt Vaccume ?? Gary General 7 July 11th 05 03:39 AM
12 volt dc monitor hanz Electronics 4 April 19th 04 07:27 AM
12 volt laptop Bob Owen Electronics 21 November 22nd 03 01:33 AM
Is it ok to run a 24 volt trolling motor on a 12 volt battery to test the motor to see if it actually runs? SDNomad General 5 October 9th 03 07:30 PM


All times are GMT +1. The time now is 09:16 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017