| Home |
| Search |
| Today's Posts |
|
#2
|
|||
|
|||
Even if the code does not work well, fixing it so it does can't be all that
difficult. Making sure the hardware is able to tell the truth is a bigger challenge. Doug "Glenn Ashmore" wrote in message news:CKNXd.60125$SF.51555@lakeread08... Anyone ever attempt to build one of these? http://www.dv-fansler.com/Projects/9.../900gd-dro.htm I downloaded and compiled the code but would like to know if it is reliable before I go to the trouble to design and make the boards. Considering all the parts can be had for under $50 and an AutoAnchor cost over $500 it looks pretty attractive. -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Windlass on an Alura 35 | General | |||
| Windlass advice | General | |||
| Windlass Electrical Connection | General | |||
| SL Windlass Problem | Cruising | |||
| GRETTIR'S SAGA (continued) | ASA | |||
Threaded Mode
