I got it to open with wordpad but compiling was a real problem. It would not
compile with MBLAB because a lot of statements were missing operands. For
example bit tests with no second argument. Had to download the TechTools
compiler that he used and it compiled and loaded fine.
--
Glenn Ashmore
I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at:
http://www.rutuonline.com
Shameless Commercial Division:
http://www.spade-anchor-us.com
"engsol" wrote in message
...
On Wed, 9 Mar 2005 20:51:36 -0500, "Glenn Ashmore"
wrote:
Anyone ever attempt to build one of these?
http://www.dv-fansler.com/Projects/9.../900gd-dro.htm
I downloaded and compiled the code but would like to know if it is
reliable
before I go to the trouble to design and make the boards. Considering
all
the parts can be had for under $50 and an AutoAnchor cost over $500 it
looks
pretty attractive.
I've used the proximity devices in several projects, and they work
well. They are available from the usual suspects, Allied, Newark, etc.
I visited the web site...the source code is a dot src file, which I refuse
to open...any one have it in a dot txt format? I've looked at a ton of
de-bounce routines, and have invented a pretty fool-proof one. I'm
always curious how others do it.
Norm B