Yah! It should be and I suspect I may have a wiring error from the serial
Data Out or Data Com. going to the interface.

The interface just sits in 'idle' mode with the red and green led flashing,
waiting for a XTE.

I may just try hooking the interface directly to the GPS and see if it will
recognize the XTE from the there..

I don't want to steer or control the AP from the GPS since it is too
difficult to program in the WPs and Routes. (being an older gps that I can't
upload these from the laptop.)

Thanks for the reassurance.. means I should check my wiring, etc.

Steve
s/v Good Intentions