Home |
Search |
Today's Posts |
#15
![]() |
|||
|
|||
![]()
Suggest you get one of these
http://www.viworld.com/foodsaver/ And some heavy sandwich / food storage zip lock bags. Shouldn't be necessary if you vacuum seal, but a shot of oil in each bag before sealing might make you feel better. After sealing run a piece of duct tape over the seal to insure it stays closed On Wed, 07 Apr 2004 11:40:17 -0700, BCC wrote: Looking for good method to pack long term spare parts on long term cruise - like a spare alternator, starter, diesel injector pump, expensive things. What I'm thinking is a very heavy gauge individual bags - something like almost 1/8" thick. Taped up with the clear packing tape that's about 2" wide. You need to be able to see what's inside. The Seal-a-Meal and other vaccum pack stuff is way too thin to last on a cruising boat for 6+ years. I've found very heavy bags on the net - but you need to buy 100 or a 1000 at a time. Also - looking for something to put in the bag as an anti-rust, corrosion, etc inhibitor. Any suggestions? -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
What Spare Parts Do You Carry? | General | |||
Parts list compatibility for volvo engines | Cruising | |||
opinions sought for full-time cruiser Tools and Spares selection | Boat Building | |||
opinions sought for full-time cruiser Tools and Spares selection | Cruising |