Steve wrote:

I don't know how much you are paying for this boat but I doubt it's your
'first born'. Looks like a good starter boat and if this is the only major
damage then you will have a good learning experience with a minimum
investment. If your survive the glass dust itch from this job then your
ready for any other lesser jobs you find.

One vital point to remember. After grinding fiberglass DO NOT take a
hot shower. That just lets the glass creep deeper into your skin. A
COLD shower seems to squeeze it out. :-)

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

Now, Glenn! We all know that if you wear protective clothing, mask, goggles
and skin cream on the exposed areas of the skin, you won't have any glass
itch ;o)~

I also might add that it is important to contain the area you are working
in, even if you wear all the protective gear. You don't want this dust to
get into your boat or the next guys boat. If you in a boat yard, make sure
you keep the boat close and clean up you own mess, even if it is just dust.
A little gust of wind can carry the dust to all the boats in the area.

I cleaned and cleaned again, the interior of my boat after 8 years of glass
work.. I don't notice any itching after spending a whole summer aboard.

Steve
s/v Good Intentions