This **** is acrylic FLOOR WAX - was it Johnson FUTURE ?? - remove it
easily with ammonia after you've figured out it doesn't work for more
that a few weeks. The shisters tried selling it as RV polish for some
years - off looking for other suckers these days. There's no wax in
it.



On Tue, 20 Jan 2004 14:40:54 -0500, "Wim" wrote:

At the Toronto Boat Show, 17 Jan, I found the following "new product" and
reasonable in cost!
PoliGlow gives "old fiberglass" again the new "wet look". It's not a wax.
PoliGlow according to their brochure rates #1 with Practical Sailor and
Powerboat Reports.
It was first produced in Miami, FL in 1991.
www.poliglow.ca
Any comments and/or experiences from the real world?

"This **** is acrylic FLOOR WAX "

No kidding??
--
c ya Wim
www.cruising.ca/thousand/f-index.html


2 wrote in message ...
: This **** is acrylic FLOOR WAX - was it Johnson FUTURE ?? - remove it
: easily with ammonia after you've figured out it doesn't work for more
: that a few weeks. The shisters tried selling it as RV polish for some
: years - off looking for other suckers these days. There's no wax in
: it.
:
:
:
: On Tue, 20 Jan 2004 14:40:54 -0500, "Wim" wrote:
:
: At the Toronto Boat Show, 17 Jan, I found the following "new product" and
: reasonable in cost!
: PoliGlow gives "old fiberglass" again the new "wet look". It's not a wax.
: PoliGlow according to their brochure rates #1 with Practical Sailor and
: Powerboat Reports.
: It was first produced in Miami, FL in 1991.
: www.poliglow.ca
: Any comments and/or experiences from the real world?
:

"This **** is acrylic FLOOR WAX "

No kidding??
--
c ya Wim
www.cruising.ca/thousand/f-index.html


2 wrote in message ...
: This **** is acrylic FLOOR WAX - was it Johnson FUTURE ?? - remove it
: easily with ammonia after you've figured out it doesn't work for more
: that a few weeks. The shisters tried selling it as RV polish for some
: years - off looking for other suckers these days. There's no wax in
: it.
:
:
:
: On Tue, 20 Jan 2004 14:40:54 -0500, "Wim" wrote:
:
: At the Toronto Boat Show, 17 Jan, I found the following "new product" and
: reasonable in cost!
: PoliGlow gives "old fiberglass" again the new "wet look". It's not a wax.
: PoliGlow according to their brochure rates #1 with Practical Sailor and
: Powerboat Reports.
: It was first produced in Miami, FL in 1991.
: www.poliglow.ca
: Any comments and/or experiences from the real world?
: