Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #41   Report Post  
Bobsprit
 
Posts: n/a
Default PoliGlow

silicon and silicone are two different things.

Examples of silicons: Pyramid scams, penis enlargement pumps, George Bush and
the war in Iraq.


RB
  #42   Report Post  
Wim
 
Posts: n/a
Default PoliGlow = Acrylic Floor Wax

"This **** is acrylic FLOOR WAX "

No kidding??
--
c ya Wim
www.cruising.ca/thousand/f-index.html


2 wrote in message ...
: This **** is acrylic FLOOR WAX - was it Johnson FUTURE ?? - remove it
: easily with ammonia after you've figured out it doesn't work for more
: that a few weeks. The shisters tried selling it as RV polish for some
: years - off looking for other suckers these days. There's no wax in
: it.
:
:
:
: On Tue, 20 Jan 2004 14:40:54 -0500, "Wim" wrote:
:
: At the Toronto Boat Show, 17 Jan, I found the following "new product" and
: reasonable in cost!
: PoliGlow gives "old fiberglass" again the new "wet look". It's not a wax.
: PoliGlow according to their brochure rates #1 with Practical Sailor and
: Powerboat Reports.
: It was first produced in Miami, FL in 1991.
: www.poliglow.ca
: Any comments and/or experiences from the real world?
:


  #43   Report Post  
Wim
 
Posts: n/a
Default PoliGlow = Acrylic Floor Wax

"This **** is acrylic FLOOR WAX "

No kidding??
--
c ya Wim
www.cruising.ca/thousand/f-index.html


2 wrote in message ...
: This **** is acrylic FLOOR WAX - was it Johnson FUTURE ?? - remove it
: easily with ammonia after you've figured out it doesn't work for more
: that a few weeks. The shisters tried selling it as RV polish for some
: years - off looking for other suckers these days. There's no wax in
: it.
:
:
:
: On Tue, 20 Jan 2004 14:40:54 -0500, "Wim" wrote:
:
: At the Toronto Boat Show, 17 Jan, I found the following "new product" and
: reasonable in cost!
: PoliGlow gives "old fiberglass" again the new "wet look". It's not a wax.
: PoliGlow according to their brochure rates #1 with Practical Sailor and
: Powerboat Reports.
: It was first produced in Miami, FL in 1991.
: www.poliglow.ca
: Any comments and/or experiences from the real world?
:


  #44   Report Post  
Armond Perretta
 
Posts: n/a
Default PoliGlow

Keith wrote:

No, "polymer" is a generic term including molecules of at least 100
carbons ...


This is a refreshing thread. Thanks for the lift.

Polymers do not require carbon, although polymers based on carbon are
common. The learn the definition of "polymer" try:

http://www.thefreedictionary.com/polymer

...Silicone is an element in the periodic table.
http://www.webelements.com/webelemen...xt/Si/key.html


Silicone (note the "e") is a polymeric form of the _element_ silicon, in
combination with other elements, most notably oxygen. To get up to speed
on this try:

http://www.dowcorning.com/content/chem/

Digression: One way to understand the difference between silicone and
silicon is to hop on an airplane to Las Vegas. Once there, try to get a
date with a dancer from one of the casino hotels. Then try to get close to
her and snuggle up. When you're finished, strip naked and run out into the
Nevada desert. Then roll around in the sand.

Know the difference yet? Las Vegas dancers are usually equipped with
silicone implants that feel soft and cuddly. The desert is covered
with sand, chemically known as silicon dioxide. The desert doesn't feel
soft and cuddly.

It's been many years since I taught college chemistry, but it a little like
riding a bike, I guess.

--
Good luck and good sailing.
s/v Kerry Deare of Barnegat
http://kerrydeare.tripod.com












  #45   Report Post  
Armond Perretta
 
Posts: n/a
Default PoliGlow

Keith wrote:

No, "polymer" is a generic term including molecules of at least 100
carbons ...


This is a refreshing thread. Thanks for the lift.

Polymers do not require carbon, although polymers based on carbon are
common. The learn the definition of "polymer" try:

http://www.thefreedictionary.com/polymer

...Silicone is an element in the periodic table.
http://www.webelements.com/webelemen...xt/Si/key.html


Silicone (note the "e") is a polymeric form of the _element_ silicon, in
combination with other elements, most notably oxygen. To get up to speed
on this try:

http://www.dowcorning.com/content/chem/

Digression: One way to understand the difference between silicone and
silicon is to hop on an airplane to Las Vegas. Once there, try to get a
date with a dancer from one of the casino hotels. Then try to get close to
her and snuggle up. When you're finished, strip naked and run out into the
Nevada desert. Then roll around in the sand.

Know the difference yet? Las Vegas dancers are usually equipped with
silicone implants that feel soft and cuddly. The desert is covered
with sand, chemically known as silicon dioxide. The desert doesn't feel
soft and cuddly.

It's been many years since I taught college chemistry, but it a little like
riding a bike, I guess.

--
Good luck and good sailing.
s/v Kerry Deare of Barnegat
http://kerrydeare.tripod.com














  #46   Report Post  
 
Posts: n/a
Default PoliGlow

On Fri, 23 Jan 2004 12:46:05 -0500, "Armond Perretta"
wrote:

It's been many years since I taught college chemistry, but it a little like
riding a bike, I guess.


A little like snuggling with a Vegas dancer, too. Falling off is
memorable.

R.

  #47   Report Post  
 
Posts: n/a
Default PoliGlow

On Fri, 23 Jan 2004 12:46:05 -0500, "Armond Perretta"
wrote:

It's been many years since I taught college chemistry, but it a little like
riding a bike, I guess.


A little like snuggling with a Vegas dancer, too. Falling off is
memorable.

R.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
boat hull cleaning and polishing RB General 10 April 13th 04 01:00 AM
PoliGlow, ever try it? Rob Evans General 8 January 10th 04 01:18 AM


All times are GMT +1. The time now is 02:27 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017