Home |
Search |
Today's Posts |
#3
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
Jere,
Thanks. This fellow sets the headstay (fore stay) hand tight and then devotes a lot of time to the shrouds. I follow that but then he announces that he's done. I don't follow that. He's backed off the head and aft stays till their loose and then tightened the head stay hand tight. He doesn't tighten the aft stays at all and doesn't tune the stays to attain any sort of rake. Hasn't he left out 1/2 the tune up. He's only done the shrouds. Also, is a Loos gauge a good thing to have. Would a rental center near the marina be a place to rent one. Dave M. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inspecting Standing Rigging | Boat Building | |||
Inspecting Standing Rigging | Cruising | |||
standing rigging | Cruising | |||
rigging tune question | General | |||
STANDING RIGGING...to ground or not? | Electronics |